JVC GZ-HD300AEK Service Manual page 23

4.3 IDE ADAPTER AND FPC WIRE
• IDE ADAPTER and FPC WIRE are used for HDD test.
Check with the NOTE, and then refer to the below figure (Fig. 4-3-1, Fig.4-3-2) for the connection procedure.
<TYPE-T>
FPC WIRE(Parts No.:YTU94165-40)
IDE ADAPTER
<TYPE-S>
FPC WIRE(Parts No.:YTU94165-40)
IDE ADAPTER
<NOTE>
• During the procedure, be careful in handling the parts. Pay special attention not to give any external shock to the HDD.
• There are two types of IDE ADAPTER (Parts Number: YTU96041, YTU96043). Either type can be used.
• Using the FPC WIRE originally used with this unit will damage the HDD.
Use the FPC WIRE (Parts Number: YTU94165-40) to connect the IDE ADAPTER and the HDD.
Connecting the FPC WIRE upside-down will damage the HDD.
<FRONT SIDE>
HDD
CONNECTOR LABEL
Fig.4-3-1
<FRONT SIDE>
HDD
CONNECTOR
Fig.4-3-2
<BACK SIDE>
HDD
<BACK SIDE>
HDD
LABEL
(No.YF307<Rev.003>)1-23