Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Tuta D2
Summary of Contents for Tuta D2
-
Page 1: User Manual
T U T A D 2 G S M R E M O T E C A M E R A USER MANUAL UserManual V1.1... - Page 2 Message Service (SMS) commands. You can also send an SMS command to the device in order to obtain real-time images. The TUTA D2 is also compatible with up to 4 normal, easy to use wired sensors which include wired infrared body-, door- and smoking sensors. You can also opt to buy our TUTA D2 already assembled with any of these above mentioned sensor types.
-
Page 3: Table Of Contents
CONTENT SECURITY ADVICE ....................... 5 EXCEPTION CLAUSE ................错误！未定义书签。 CHAPTER 1 FEATURES AND ACCESSORIES ..............7 1.1 Product Features ......................7 1.2 Product Accessories ......................8 1.3 Host interface ........................8 CHAPTER 2 TERMS EXPLANATION ..................9 2.1 User Authorization Level ....................9 2.1.1 Super-Administrator number .................... - Page 4 3.7.1 Add an watchman number ....................19 3.7.2 Remove a watchman number / bound camera or sensor ..........20 3.7.3 Check watchman number ....................22 3.8 Capturing image ......................22 3.9 Arming the device - Manual ................... 23 3.10 Disarming the device - Manual ..................23 CHAPTER 4 ADVANCED OPERATIONS ................
-
Page 5: Security Advice
1. You must purchase a GSM SIM card (mobile phone card) from GSM network service and install it in the TUTA D2 host. This SIM card number is TUTA D2 device number on this brochure. The SIM card needs to be activated with both MMS functions and caller ID functions. - Page 6 5. The contents of this document are provided “as is”. Except as required by applicable law, we offer no warranties of any kind, expressed or implied, including, but not limited to the accuracy, reliability or contents of this document. We reserve the right to revise this document or withdraw it at any time without prior notice.
-
Page 7: Chapter 1 Features And Accessories
CHAPTER 1 FEATURES AND ACCESSORIES 1.1 Product Features This product uses a GSM SIM card. It can send multimedia messaging (MMS) images to MMS enabled mobile phones. This allows users to check on the monitored areas at any time and anywhere GSM/GPRS network coverage and MMS service coverage is available. -
Page 8: Product Accessories
1.2 Product Accessories No. Description Quantity Remarks TUTA D2 host GSM antenna Network cable Input/output cable for sensor, alarm device cable 6pcs connecting and camera power supply. Management Software CD User Manual Installation Guide 1.3 Host interface... -
Page 9: Chapter 2 Terms Explanation
Administrator numbers and Watchman numbers. 2.1.1 Super-Administrator number Only one Super-Administrator number is allowed per TUTA D2 device. It has the authority to add or remove the Administrator and Watchman numbers, change the password and use all functions of TUTA D2 except receiving alarm information via mobile phone. -
Page 10: Arming The Camera
If the host is connected with a management computer which has installed the TUTA WIRELESS IMAGE MONITORING SYSTEM, the computer will pop up to show the... -
Page 11: Bind The Sensor With Camera(S)
But the sensor which is not bound to the camera will still trigger the armed host, sending out an alarm SMS message. 2.11 Host The host is the TUTA D2 host. 2.12 Indicator Status Instructions of the host Color... -
Page 12: Show Alarm On Computer
2.15 Settings All the settings can be set or adjusted via SMS commands or TUTA WIRELESS IMAGE MONITORING SYSTEM. 2.16 Timing arms/disarms the camera... -
Page 13: Starting The Device
Welcome. Super administrator ID:*******. PW:888888. IP:*** Note: The information returned in a successful SMS reply is used for logging onto the TUTA WIRELESS IMAGE MONITORING SYSTEM. Be sure to keep the information secret. Failed SMS reply: If another user tries to activate the device again, the device will send a notification via SMS stating “Super admin number already exists.”... -
Page 14: Change The Password
In order to ensure your privacy and safety during the use of this device, change the password once the device is being used. There is only one password. The user can change it via SMS command or TUTA WIRELESS IMAGE MONITORING SYSTEM. -
Page 15: Sensor
• CameraNumber should be one-digit number and in the range of 1-4. It should correspond with the number of Video BNC socket on the host. • CameraDescription’s character description composed of up to 20 characters. CameraDescription can be either letters and/or numbers. •... -
Page 16: Bind A Sensor With The Camera(S)
Set sensor description successfully. Failed SMS reply: If the sensor description is invalid (for example, it is all numeric), the device will send a notification message via SMS stating “Invalid sensor description, please rename the sensor.” 3.5.2 Bind a sensor with the camera(s) Authority: Super-Administrator number and Administrator number. -
Page 17: Add Or Remove Administrator Number
After binding a sensor with a camera, in order to make the host only send out SMS alarm information but no MMS image when the sensor alarms, it is necessary to remove the sensor from the camera(s). Command: The user must edit and send the following SMS command to the device in order Remove a sensor from the bound camera(s): #41#SensorNumber#CameraNumber#.. -
Page 18: Remove An Administrator Number/ Remove Bound Camera
Add the Administrator number bound with all camera(s): (10) #06# AdministratorNumber# • AdministratorNumber should be the mobile number which is desired to act as an Administrator number. The length of AdministratorNumber is in the range of three to nineteen. • CameraNumber should be a one-digit number and in the range of “1” to “4”. It is the camera number which is bound with the AdministratorNumber. -
Page 19: Check Administrator Number
Remove an Administrator number: (12) #113#AdministratorNumber# Remove all Administrator number(s): (13) #113# • AdministratorNumber should be the mobile number which the user wants to remove. The length of the AdministratorNumber is in the range of three to nineteen. • CameraNumber should be one digit number and in the range of “1” to “4”. It should be the camera number which bound with the AdministratorNumber. -
Page 20: Remove A Watchman Number / Bound Camera Or Sensor
Command: ******************************* The user must edit and send the following SMS command to the device in order Add the Watchman number bound with the camera(s) and sensor(s): (14) #106#WatchmanNumber#CameraNumber#..CameraNumber#SensorNumber#..#SensorNumber# Add the Watchman number bound with all camera(s): (15) #106#WatchmanNumber#*# Add the Watchman number bound with all sensor(s): (16) #106#WatchmanNumber#S*#... - Page 21 • If the user removes a bound camera or sensor from the Watchman number successfully, the Watchman number will not receive the images captured by the camera any more. • If the user removes a bound sensor from the Watchman number successfully, the Watchman number will not receive the alarm information triggered by the sensor any more.
-
Page 22: Check Watchman Number
3.7.3 Check watchman number Refer to Chapter 4.8. Check status. Capturing an image Authority: Super-Administrator number has authority to capture image from all cameras. Administrator and Watchman numbers have authority to capture image from the camera(s) which bound with them. Description: •... -
Page 23: Arming The Device - Manual
Arming the device - Manual Authority: Super-Administrator number has authority to arm all cameras. Administrator numbers have authority to arm the camera(s) which are bound with them. Description: • After arming the host, the indicator light will turn constant light green. For information about “arming the camera”... -
Page 24: Chapter 4 Advanced Operations
Super-Administrator number has authority to disarm all cameras and the host. Administrator numbers have authority to disarm the camera(s) which are bound with them. Description: After disarming the host, the indicator light will turn flashing green. See chapter 2.11 disarming the device for details. Command: The user must edit and send the following SMS command to the device in order Disarm the host:... -
Page 25: Choose Network Operator's Mms Parameter
4.1.1 Choose network operator’s MMS parameter Authority: Super-Administrator number and Administrator number. Description: • If there are several GSM providers in a country, in general, their MMS parameters have been preset on the device. The user needs to choose the correct GSM provider according to the SIM card. -
Page 26: Setting Apn Parameters
4.1.3 Setting APN parameters Authority: Super-Administrator number and Administrator number. Command: The user must edit and send the following SMS command to the device in order Setting APN parameters: (33) #125#GatewayIP#GatewayPort#APN#APNUserName#APNPassword# • APNUserName and APNPassword are not necessary. • For example: #125#10.0.0.172#9201#cmwap#wap#wap# ☺... -
Page 27: Set Time Period To Arm/Disarm The Camera
Available timing arm/disarm all camera(s): #128#1# (34) Available timing arm/disarm a camera: #128#1#CameraNumber# (35) • CameraNumber should be one digit number and in the range of “1” to “4”. It should be the camera number which wants to set timing arm/disarm. •... -
Page 28: Disable Timing Arm/Disarms The Camera
the same day, and the DisarmingTime must be later than ArmingTime. • CameraNumber should be one digit number and in the range of “1” to “4”. It should be the camera number which wants to set timing period. • CameraNumber can be replaced with Camera Description. ☺... -
Page 29: Available Timing Sends Mms Images
automatically. The schedule can be reset again and again onto the device, and the last setting will always be activated. • When the camera is under timing sends image status, the host will automatically activate the function of sending out MMS information. •... -
Page 30: Disable Timing Sends Mms Image
Value Corresponding day Everyday Monday Tuesday Wednesday Thursday Friday Saturday Sunday Monday to Friday • StartTime and EndTime: Be consists of 4 digits (hh:mm) and works on a 24 hour clock. For example: 0000 means time 00:00(hh:mm), 2359 means time 23:59(hh:mm). -
Page 31: Image Parameter Setting
Failed SMS reply: Wrong parameter. Please check and try again. Image parameter setting Authority: Super-Administrator number has authority to set all cameras. Administrator numbers have authority to set the camera(s) which are bound with them. 4.4.1 Setting the image size Command: The user must edit and send the following SMS command to the device in order Setting image size of all camera(s):... -
Page 32: Motion Detection
Auto-alarm image quantity for a camera: (49) #33#quantity#CameraNumber# • The quantity value should be between the range of “2” to “5”, • The default quantity value is “3”. • The size of the first two individual pictures is 320×240; others are the same as pre-set image size (Refer to 4.4.1 setting the image size.). -
Page 33: Change The Super-Administrator Number
• After changing of Super-Administrator number, the password will return to default 888888. • There is only one Super-Administrator number. The user can change it via SMS command or via TUTA WIRELESS IMAGE MONITORING SYSTEM. Reseting the device Authority: Super-Administrator number. -
Page 34: Check Status
Command: The user must edit and send the following SMS command to the device in order Reseting the device: #08#PassWord# (53) • The password should six-digit number which Super-Administrator user. • The default password is 888888. ☺ Successful SMS reply: Resumed to default setting successfully, pls wait for restarting... -
Page 35: Getting Help
The user must send the following SMS command to the device in order to: Getting frequently used commands: #09#1# (56) ☺ Successful SMS reply: The device will reply with a message named “TUTA user manual” via MMS to user’s mobile phone. All the command descriptions as well as the codes will be supplied. -
Page 36: Language Version Switch
4.10 Language version switch Authority: Super-Administrator number. Description: The device supports both English and Spanish language display. Command: The user must edit and send the following SMS command to the device in order Switch to Spanish version: #127#0# (57) Switch to English version: #127#1# (58) ☺... - Page 37 The host can not IP address invalid. the same with the IP on communicate with the SMS reply when the TUTA WIRELESS host was start. IMAGE The user name and MONITORING Wrong user name and password typed on the SYSTEM.
- Page 38 host was start. There are other devices which have the same Modify the MAC. MAC code working with the system. SIM card not installed Indicator constant Can’t find or identify the properly: Power off the light in red color. SIM card; camera and check it again.
-
Page 39: Appendix: Sms Commands List
Appendix: SMS commands list SMS Command Function Command #00# Start the device Name the camera #15#CameraNumber#CameraDescription# Name the sensor #05#SensorNumber#SensorDescription# Bind a sensor with the #40#SensorNumber#CameraNumber#..camera(s) CameraNumber# Sensor Bind a sensor with all #40#SensorNumber# camera(s) Remove a sensor from #41#SensorNumber#CameraNumber#.. - Page 40 SMS Command Function Command Add the Watchman number bound with all #106#WatchmanNumber#S*# (16) sensor(s) Add the Watchman number bound with all #106#WatchmanNumber# (17) camera(s) and sensor(s) Remove a bound camera and a sensor #107#WatchmanNumber#CameraNumber#SensorNumb (18) from a Watchman number Remove the bound camera(s) and #107#WatchmanNumber#CameraNumber#..CameraN (19)
- Page 41 SMS Command Function Command Disarm Disarm the host #02# (28) the device Disarm the camera #02#CameraNumber# (29) manually Disarm all camera(s) #02#*# (30) Capture an image at a #03#CameraNumber# (22) time Capture image Capture several #03#ImageQuantity#CameraNumber# (23) images at a time Capture one image per #03# (24)
- Page 42 SMS Command Function Command Setting image size of a #32#value#CameraNumber# (47) camera Auto-alarm image Auto-alarm quantity for all #33#quantity# (48) image camera(s) quantity Auto-alarm image #33#quantity#CameraNumber# (49) quantity for a camera Check Check status #07# (54) status Choose network operator’s MMS #145#mode#name# (31) parameter...
Need help?
Do you have a question about the D2 and is the answer not in the manual?
Questions and answers