Fan Setting - Honeywell VisionPRO TH8110U Operating Manual

Fan setting

WED
70
FAN
Inside
AUTO
HEAT
6:01
AM
SCHED HOLD CLOCK SCREEN
Press
Note: If a fan schedule is programmed,
"Auto" will run the fan schedule.
70
Set To
Following
Schedule
MORE
Press to select fan operation, then press
• On: Fan is always on.
• Auto: Fan runs only when the heating or
cooling system is on.
• Circ: Fan runs randomly, about 35% of the
time, not counting any run time with the
heating or cooling system.
You can press
you've programmed for different time periods
(see page 11). If you select On or Circ, the
setting you select will remain active until you
press again to select Auto (see page 27
for more information).
7
VisionPRO TH8000 Series
®
to override the fan settings