Advertisement
ZUMA BREWER - OPERATION & SERVICE MANUAL
Cleaning the Brewer Screen Assembly
The Zuma brewer filter screen needs to be cleaned periodically to allow liquid to easily flow
through it. Over time, coffee dust, oils and minerals from the water will accumulate on the screen
making it less porous, eventually resulting in brewer flooding. It is recommended that the screen be
cleaned every 1000-2000 cups, even if it appears to be working properly.
Using the Zuma screen extractor tool, remove the screen from the brewer to clean it. We
recommend soaking the screen in a solution of one part bleach to ten parts water for a
maximum of 30 minutes, as prolonged contact with bleach may damage the screen assembly.
Once this is done, the screen should then be thoroughly rinsed with dish soap and warm water to
remove any leftover residue.
NOTE: Periodically performing an automated brewer rinse cycle is still required to clean the brewer
screen as well as other brewer components.
Zuma Brewer (N016352)
0009
Page 5
Advertisement
