Using The Setup Wizard To Auto-Detect Your Internet Connection - NETGEAR DG834G Connecting Manual

Wireless ADSL2+ Modem Router DG834G User Manual
Using the Setup Wizard to Auto-Detect Your Internet
Connection
The Setup Wizard searches your Internet connection for servers and protocols to determine your
ISP configuration.
Note: The wizard cannot detect a PPTP connection with your ISP. If your ISP uses this
protocol, then you must configure your connection manually (see
Manually Configuring Your ISP Settings" on page
To use the Setup Wizard to assist with configuration or to view the Internet connection settings:
1. Log in to the main menu following the steps described in
on page 1-3
2. Select Setup Wizard to go to the Setup Wizard screen:
Figure 1-3
3. Select your Country and Language:
• Country. It is important to specify the location where the modem router will operate so
that the Internet connection will work correctly.
• Language. You can select a language from the drop-down list.
4. Select your Auto-Connection Type: Auto-Detect Connection Type. If you want to change the
settings for the Internet connection, select Yes or No, and then click Next.
• Yes. Let the modem router Setup Wizard auto-detect the type of Internet connection that
you have and configure it.
1-4
"Logging In to the Modem Router"
Configuring Your Internet Connection
v1.0, May 2008
"Viewing or
1-6).