Panasonic KX-FLM652CX Service Manual page 67

Code Function
593 Time between CED and 300bps
594 Overseas DIS detection select
595 Receive error limit value set
596 Transmit level set
598 Receiving sensitivity
599 ECM frame size
628 H.V.P.S. check
639 LSU test
651 Write system program into the Flash Rom.
655 Cause Distinction Code of Call Service 3
677 FAN test
710 Memory clear except History data
717 Transmit speed selection
718 Receive speed selection
721 Pause tone detect
722 Redial tone detect
763 CNG detect time for friendly
reception
771 T1 timer
774 T4 timer
815 Sensor test
852 Print test pattern
853 Top margin
854 Left margin
874 DTMF ON time
875 DTMF OFF time
880 History list
881 Journal 2 list
882 Journal 3 list
991 Setup list
994 Jurnal list
995 Jurnal 2 list
996 Jurnal 3 list
998 History list
999 Service list
Set Value Effective
Range
1:75 msec 1~3
2:500 msec
3:1 sec
1:detects at 1, 2
the 1st time
2:detects at
the 2st time
1: 5% 1~4
2: 10%
3: 15%
4: 20%
X dBm 00~15
(00~ -15)
43= -43 dBm 20~48
1:256 2:64 1, 2
1:14400BPS 1~6
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1:14400BPS 1~6
2:12000BPS
3:9600BPS
4:7200BPS
5:4800BPS
6:2400BPS
1:ON 2:OFF 1, 2
1:ON 2:OFF 1, 2
1:10 sec 1~3
2:20 sec
3:30 sec
1:35 sec 1, 2
2:60 sec
X 100 sec 00~99
X 0.5 mm 1~5
X 0.677 mm 1~7
X msec 060~200
X msec 060~200
67
Default Remarks
1 See Symptom/Countermeasure Table for long
distance and international calls in (P.126). Refer
to (P.120) and (P.126).
1 See Symptom/Countermeasure Table for long
distance and international calls in (P.126). Refer
to (P.119) and (P.126).
2 If the number of errors during transmission
exceeds this value, the sending side terminates
the call.
10 Selects the FAX transmission level. Refer to
(P.119) and (P.120).
43 Used when there is an error problem. Refer to
(P.126).
1
See (P.69).
See (P.69).
See the parts number of the tool. (P.254). The
tool includes the operating manual for writing
program.
See (P.91).
See (P.91).
Refer to Memory Clear Specification (P.68).
1 Adjusts the speed to start training during FAX
transmission. Refer to (P.119).
1 Adjusts the speed to start training during FAX
reception. Refer to (P.120).
2 Selects the tone detection for pause in dialing.
2 Sets the tone detection mode after redialing.
3 Selects the CNG detection tone of friendly
reception.
1 Sets a higher value when the response from the
other party needs more time during FAX
transmission.
00 Use this function when delay occurs in the line
and communication.
(ex. Mobile comm) does not work well.
See (P.70).
See (P.70).
4
1
90
90
See (P.80).
See (P.123).
See (P.124).
Push start button to print out setup list
Push start button to print out journal list
Push start button to print out journal 2 list
Push start button to print out journal 3 list
Push start button to print out history list
Push start button to print out service list
KX-FLM652CX
----------
----------
----------
----------
----------