Product View - Bissell OXY POWERWASH 16979 Series User Manual

A

Product View

Do not plug in your cleaner until you have
completely assembled it per the following
instructions and are familiar with all instructions
and operating procedures.
1 Handle
2 Spray Trigger
3 Tough Stain Brush
4 ReadyTools™ Dial
5 Belt Access Door
6 Floor Nozzle Window
7 Cord Clip
8 Quick Release™ Cord Wrap
9 Flex Hose
10 Power Switch
11 Tank-in-Tank™
12 Handle Release
13 4" Upholstery Tool
14 Oxy Power Tool
15 TurboBrush™ Tool
16 Spraying Crevice Tool
Keep plenty of genuine BISSELL 2X cleaning formula on hand so you can
clean and protect whenever it fits your schedule. Always use genuine
BISSELL deep cleaning formulas. Non-BISSELL cleaning formulas may
harm the machine and will void the warranty.
note: additional bissell formula options
may be available at your local retailer.
www.bissell.com
6
CLEANING FORMULA
17 1.5 L 2X Wash & Protect
Professional Formula w/
Scotchgard™ Protector
#1089-E
18 1.5 L 2X Wash & Protect
Pet Stain & Odour Formula
w/ Scotchgard™ Protector
#1087-E
19 1.5 L 2X Wash & Protect
Stain & Odour Formula
w/ Scotchgard™ Protector
#1086-E
20 1 L Oxygen Boost #1134-E
21 1 L 2X Wash & Shine Hard
Floor Solutions #1144-E
22 651 mL Tough Stain
Precleaner #1147-E
B
Assembly
Your OXYPowerWash™ comes in three, easy
to assemble components:
Upper Handle
lower Handle
tool caddy
The only thing you will need to assemble
your cleaner is a Phillips-head screwdriver.
1. slide upper handle onto lower handle.
2. Feed bundled power cord through tool
caddy from caddy's flat side.
3. Align upper handle holes and tool
caddy holes.
4. Place hex nut into back of tool caddy and
hold in place. insert bolt from front to back,
turning into the hex nut until snug. Do not
over tighten. Repeat for the second bolt and
hex nut.
5. insert 2 screws into lower 2 holes.
Turn until snug.
6. snap tools into storage on the tool caddy.
7. Wrap power cord and flex hose as shown
in figure 7.
OXYPowerWash assembly is now complete.
To reduce the risk of fire, use only BISSELL cleaning
formula for full size machines in your deep cleaner.
Use of cleaning formulas that contain lemon or pine
oil may damage this appliance and void the warranty. Chemical
spot cleaners or solvent-based soil removers should not be used.
These products may react with the plastic materials used in your
deep cleaner causing cracking or pitting.
To reduce the risk of fire and electric shock due to internal
component damage, use only BISSELL cleaning formulas
intended for use with the portable spot cleaner.
To reduce the risk of electric shock, always install
float stack before any wet pick-up operation.