Wireless; Wireless Network - EnGenius ECB3500 User Manual

11b/g Wireless Long Range Multi-function 7+1 AP

4.4 Wireless

4.4.1 Wireless Network

The Wireless Network page allows you to configure the wireless mode, channel,
SSID, and security settings.
Wireless Mode: Depending on the type of wireless clients that are connected to the
network, you may select B, G, B/G-mixed and SuperG. If you are not sure about
which clients will be accessing the wireless networks, it is recommended that you
select B/G-mixed for the best performance.
Note:
In order to achieve 108Mbps data rate, you will need to check the client card is
supporting to 108Mbps as well. If your client device is not super G supported, you
can only get 54Mbps throughput only.
The AP default is set as Dynamic Super-G mode, which means if there is any non-
super-G supported client surrounded, the AP will switch to normal G automatically.
Channel: Select a channel from the drop-down list. The channels available are
based on the country's regulation. When selecting Infrastructure mode, a channel is
not required, however, when selecting Adhoc mode, you must select the same
channel on all points.
Current Profiles: You may configure up to four different wireless profiles. Click on
the Edit button to modify the profile and place a check in the Enable box to activate
the profile.
Click on the Wireless link on the navigation
drop-down menu. You will then see four
options: wireless network, wireless MAC filter,
WDS link settings, and wireless advanced
settings. Each option is described below.
Version 1.1
20