Download Print this page

Inteno X5669 Installation Manual page 4

Adsl2+ residential gateway

Advertisement

Available languages

Available languages

Connecting the
e
Wireless Local Area
Network (WLAN)
1. Search for available wireless networks
using the WLAN client.
2. Compare the list with the SSID which
is shown on a sticker on the under side
of the X5669.
3. Connect by double clicking on the
correct SSID and then providing the
encryption code which is shown on the
sticker labelled WPA on the under side
of the X5669.
Connecting your digital
f
TV Box for IPTV
1. A network cable was provided with
your digital TV Box. Connect it to the
network port (LAN 1-4). NOTE! In some
cases, your broadband service
provider will instruct you to connect to
a specific network port (LAN 1-4).
Verify this in the documents and/or
manual you received from your service
provider.
2. Connect the other end of the network
cable to your digital TV Box for IPTV.
3. Start the digital TV Box for IPTV.
4. If a problem should occur during the
connection process, we recommend
that you contact your service provider.
X5669 ADSL2+
6
Residential Gateway
Connecting
g
IP Telephony (VoIP)
1. Connect the telephone cable to the
port labelled TEL 1 on the FG101.
2. Connect the other end of the telephone
cable to your telephone. Alternatively,
follow the instructions from your
service provider.
3. Activate the telephony service
according to the instructions from your
service provider.
Description of
h
the front panel
1. Power indicator light
On (green) – The X5668 is connected
to a power source.
On (red) – Start up error (contact your
service provider)
Off – The X5668 is not connected to a
power source
2. DSL indicator light
On – Connected to the DSL network
On – Not connected to the DSL
network
Blinking -- Active
3. Internet indicator light
On (green) – IP address received
On (red) – IP address not received
5. Ethernet indicator light
On – LAN connected
Off – LAN not connected
Blinking – Active
6. WLAN indicator light
On – WLAN activated
Off – WLAN not activated
Blinking – Active
7. WLAN-ON/OFF
On – WLAN activated
Off – WLAN not activated
Advanced network
i
administration
Check that the computer which is
connected to your modem has been
issued an automatic IP address between
192.168.1.2 and 192.168.1.254. You may
need to manually set the IP address. For
example: 192.168.1.23, subnet mask:
255.255.255.0.
1. In your browser's address line type
http://192.168.1.1
2. Login in using admin for the user name
and admin for the password
3. Select the function you want from the
modem's menu on the left. Note that
network administration is only available
in the standard software. If your service
provider has their own software, this
function may be turned off or have
only limited function. Contact your
service provider for more information.
Troubleshooting
j
1. Check that the power is on. The power
indicator light should be on (Power).
See picture labelled "Front."
2. Is the power indicator light off? Check
that the modem is properly connected
to the power adapter. Check that
the power adapter is connected to an
electrical outlet. If the modem is
properly connected to an electrical
outlet, a power indicator light that is
still not on may indicate a faulty
modem or a faulty power adapter.
Contact your service provider.
3. Are the Power and Internet indicator
lights red? Contact your service
provider.
4. Is the DSL indicator light off? Check
the connection between the DSL port
on the modem and your telephone
jack. If the DSL indicator light is off,
despite proper connection, contact
your service provider.
5. Is your broadband connection is
broken when one of the telephones in
the house is lifted? This probably
means that the modem is not con
nected to the first telephone jack. This
is also the case if there is excessive
static on the line. Move the modem to
the first incoming telephone jack.
6. Is the Ethernet indicator light off?
Check the connection between the
LAN port on the modem and the
Network Interface Card (NIC) in your
computer. Check that the NIC in your
computer is functioning properly.
7. Reset button. See picture labelled
"Back." This button resets the modem
to factory settings. Hold it in for
10 seconds.
X5669 ADSL2+
Residential Gateway
7

Advertisement

loading