Product Features; System And Network Environment; Package Contents; Chapter 2 Hardware Description And Connection - Bosslan BOSSC55 Wi-Fi Camera Pro User Manual

1.2 Product Features

1. High Resolution Image Processor (640*480/320x240/176*144) with
built-in MJPEG encoder.
2. Ethernet RJ-45,10/100 Base-T with auto-sensing.
3. Remote view through the IE browser, simply type in the IP address.
4. 6 infrared LEDs provide imaging in the
5. Many Valuable Internet services: Email, FTP, PPPoE,
NTP service, User Management, and
6. USB 1.1 Interface making it useful as a web cam.
7. Compatible with Microsoft MSN Messenger
8. 802.11g wireless (Compatible with 802.11b Access Point)
(Wi-Fi Camera Pro only).

1.3 System and network environment

1. LAN: 10Base-T Ethernet or 100Base TX Fast Ethernet.
2. More than one fixed IP address is recommended.
3. A 10/100Base-T switch HUB is required.
4. Microsoft Internet Explorer 5.0 or above.
5. Pentium III 1G CPU or above.
6. 64MB RAM or above.
7. VGA card with 8MB Memory or above (800x600 or above).
8. Windows 2000/XP is recommended.
Important: A fixed IP address is not required to access camera from
the Internet. However if your IP address is dynamic, you need to ask
your Internet service provider for the Dynamic DNS service.

1.4 Package Contents

1. Wi-Fi Camera Pro or IP camera Pro
2. Mount
3. Quick start
4. Driver CD (Surveillance software is
5. USB Cable
6. RJ-45 Cable (cross over wire)
7. Switching Adapter, DC 5V/2A (-)
dark.(Night Version only)
Dynamic DNS,
Image quality Control.
and NetMeeting.
optional)
( (+)
4
CHAPTER 2
Hardware Description and Connection

2.1 Hardware description

1. Camera switch: Change the mode between PC Camera (USB),IP
Camera Pro and Wi-Fi Camera Pro
2. Connections and Interface: USB 1.1, RJ45 and Power adapter
3. Reset and Default:
a. Reset: When you change the mode between PC Cam, IP
Camera ,Wi-Fi Camera or set the Camera, you must reset (reboot) the
system.
b. If you forget the IP address or ID Password, you can restore the
original default parameters.
c. Default IP address: http://192.168.1.100.
Default User ID: root ,
Default User Password: admin
4. Connections and Interface: USB 1.1, RJ45 and Power adapter
5. A Ready LED: In IP or Wi-Fi Camera mode, when the ready LED is on
(takes about 30 ~ 40 seconds to light) then the IP Camera can be
operated.
5: 6 infrared LEDs with night-vision lens
6.The indicator LED:
a. Link LED : When IP Camera is connected to the network, this light will
be turned on
b. 10/100 T Base LED: Indicates the network status, as well as indicating
5