2.9: How to use the virtual IP to connect IP Camera and Internet.
If your network Architecture supports the following figure,
You will need to do port and local virtual IP forwarding in the firewall or
gateway setup
Step1 : In this Page "Device administrator Setup", please enable the
function "Multiport Defaults" and assign a port number for the
IP Cam
Step2 : Setup your firewall or gateway, and assign a Local Virtual
IP:192.168.1.100 and open a port 8888 for the IP Cam, the
20
following figure is just a example, you need to ask your Internet
Service Provider
Step3 : In the Remote Computer, please open the Internet Explorer,
and input the IP address:
http://61.30.13.40:8888
21