NETGEAR RangeMax WPN111 Basic Setup page 5

a. Locate an available USB port on your PC. Connect the USB cable to the WPN111 and
insert the other end of the cable into the USB slot on your PC. See
Adapter Cradle" on page
Note: If you do not have a USB 2.0 port on your PC, the throughput of the
b. Restart your computer.
You will be prompted to select the country where you are located.
c. Select the country and click Agree.
3. Use the Smart Wizard to set up your wireless USB adapter.
Figure 1-3
a. Windows 2000 users go to Step b. Windows XP or Vista users can set up the wireless
adapter with the NETGEAR Smart Wizard (recommended) or the Windows configuration
utilities.
• NETGEAR Smart Wizard: Reveals more information about each network and
makes it easier to troubleshoot network connection problems.
• Windows configuration utilities: See the Windows documentation or "Using
Windows XP and Vista Wireless Configuration Utilities" at:
http://documentation.netgear.com/reference/enu/winzerocfg/index.htm
b. Click Next to accept the NETGEAR Smart Wizard.
NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual
1-10.
WPN111 will be limited to the 14 Mbps of the USB 1.1 standard.
v2.0, February 2007
"Placing the USB
1-5