Wpn111 Default Wireless Settings; Installation - NETGEAR RangeMax WPN111 Basic Setup

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.

WPN111 Default Wireless Settings

If this is a new wireless network installation, use the factory default settings to set up the network
and verify wireless connectivity. If this is an addition to an existing wireless network, you will
need to identify the wireless network and wireless security settings that are already defined.
Your RangeMax WPN111 Wireless USB 2.0 Adapter factory default basic settings are:
• Network Name Service Set Identification (SSID): Any (First available network)
Note: In order for the RangeMax WPN111 Wireless USB 2.0 Adapter to
communicate with a wireless access point or wireless adapter, all devices must
be set up to use the same wireless network name (SSID).
• Network Mode (Infrastructure or Ad-hoc): Infrastructure
• Data security WEP, WPA2-PSK, or WPA-PSK encryption: Disabled

Installation

To install the RangeMax WPN111 Wireless USB 2.0 Adapter:
1. First, install the WPN111 software:
Insert the NETGEAR CD. If the Welcome page does not open, double click Autorun.exe on
the CD.
NETGEAR RangeMax Wireless USB 2.0 Adapter WPN111 User Manual
v2.0, February 2007
1-3