Table of Contents
Advertisement
OPERATIONS ON DVD DECK
46
EN
CANCEL
PROG/CHECK
ENTER
1
2
3
4
5
6
7
8
9
0
rtw e
When Programs Overlap Each Other
If "PROGRAM OVERLAPPED" appears, you have another
program overlapping the program you have just made.
Confirm with the arrow on "OK", then press PROG/CHECK.
Program Check screen appears and conflicting programs will be
highlighted in pink.
Example: Program 3 (you have
just made) and Program 4
overlap each other.
1
Confirm the overlapping
programs. Overlapping programs
appear on the TV screen.
NOTE:
If you do not mind this overlap, press
PROG/CHECK to finish the timer
program setting. The program with the lower program number will be
recorded and the other one will not be recorded correctly. If no changes
are made for approximately 1 minute, the unit will return to the normal
screen.
2
Press rt to select the desired program to be cancelled or
changed.
To cancel the program
Press CANCEL.
"THE TIMER PROGRAMING SETTING WAS CANCELLED" appears
on the TV screen for about 5 seconds, then the normal screen
resumes.
To change the program setting
Press ENTER, then go to step 3.
3
Change the program setting.
Refer to steps 5 – 10 in "Manual Timer Programing" (
4
Press PROG/CHECK to check if the conflict has been settled.
Program check screen appears.
5
Engage the unit's timer mode.
Refer to step 6 in "Check, Cancel And Change Programs"
(
pg. 45).
NOTE:
When any overlaps remain after deletion and modification of programs,
Program Check screen remains showing the conflicting programs. In
such a case, repeat the procedure above until the conflict is solved.
pg. 42).
Hide quick links:
Advertisement
Table of Contents
