Table of Contents
Advertisement
80
EN
8 ANALOG DOWN MIX
DOLBY SURROUND
STEREO
8 D. RANGE CONTROL
WIDE RANGE
NORMAL
TV MODE
8 OUTPUT LEVEL
STANDARD
LOW
Set to the appropriate mode according to your audio system when you play
back a DVD VIDEO disc recorded with surround multichannel audio. This
setting affects only the analogue audio output signal from the AUDIO OUTPUT
connectors (DVD) when playing back a DVD VIDEO disc recorded with
surround multichannel audio.
DOLBY SURROUND
:
Select this when you enjoy multichannel surround audio by
connecting the unit's analogue AUDIO OUTPUT connector
(DVD) to a surround decoder or an internal amplifier.
STEREO:
Select this when you enjoy conventional 2-channel stereo
audio by connecting the unit's analogue AUDIO OUTPUT
connectors (DVD) to a stereo amplifier/receiver or TV, or when
you dub audio of a DVD VIDEO disc recorded with surround
audio to your MD, cassette, etc.
NOTE:
The "ANALOG DOWN MIX" function does not work when the 3D Phonic function is
activated. (
pg. 46)
The dynamic range (the difference between the loudest sound and the quietest
one) can be compressed during playback of a program encoded in Dolby
Digital format.
This function takes effect when a DVD VIDEO disc recorded in Dolby Digital
format is played back at low or middle volume.
WIDE RANGE: Select this to inactivate this function when you enjoy wide
dynamic range program.
NORMAL:
Normally select this setting to activate this function.
TV MODE:
Select this when you hear the sound through the TV's
speaker(s).
NOTES:
This function works only when playing back a disc recorded with Dolby Digital format.
The setting is not effective for other discs.
This function does not work when the 3D Phonic function is activated. (
You can lower the output level of analog audio to accommodate the unit to the
connected A/V equipment.
STANDARD: Normally select this.
LOW:
The output level of analog audio is lowered.
SUBSIDIARY SETTINGS (cont.)
pg. 46)
Advertisement
Table of Contents
