Initial Settings; Plug & Play Set - JVC HR-XVC33UM Instructions Manual

Filename [XVC33UM_06Index.fm]
XVC33UM_01.book Page 16 Monday, August 4, 2003 7:24 PM
16
EN
Plug & Play Set
Auto Channel Set
The Plug & Playn Set simplifies installation by guiding
you through the procedures of setting the language, clock
and tuner channels — simply follow the on-screen menus
that appear.
Page 16
Before starting, make sure of the following:
The TV aerial cable should be connected to the unit.
The unit's AC power cord should be connected to a AC
outlet.
The TV should be set to its AV mode (with AV, S-VIDEO or
Component Video connection (
channel (with RF connection
Slide the TV/VCR/DVD switch to the right.
A
Turn on the unit.
Press 1 on the unit or Remote. The Language Select
screen appears on the TV screen.
B
Select the language.
Press rt to move the
highlight bar (arrow) to the
language of your choice,
then press OK or e.
The Clock Set screen appears.
NOTE:
The selected language is only available on the screen for VCR
deck. Set manually the on-screen language for the DVD deck.
( pg. 21)
C
Set the time.
Press rt to set the hour,
then press OK or e.
Press and hold rt to change
the time by 30 minutes.
D
Set the date.
Press rt to set the date, then press OK or e.
Press and hold rt to change the date by 15 days.
E
Set the year.
Press rt to set the year.
Masterpage:Left0

INITIAL SETTINGS

pg. 13, 14, 15) or VCR
pg. 13).
LANGUAGE SELECT
ENGLISH
ESPAÑOL
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
CLOCK SET
TIME DATE YEAR
– –:– –AM 1/ 1 03
PRESS ( , ), THEN (OK)
PRESS (MENU) TO END
4 August 2003 6:42 pm