ViewSonic VP191b-1 Service Manual page 13

Ergonomics
Tilt Up
Tilt Down
Swivel Right
Swivel Left
Height Adjust
Pivot
Cabinet Material
Display Head Plastic Material
Neck/Base Plastic Material
Internal Plastic Cabinet Components
Front Bezel Color
Neck, Base, Speaker Cover,
Rear Cover and Rear Logo Color
Cabinet Color Drift Due To UV-Light
Cabinet Texture
Samples
ViewSonic Corporation
From 0º up to ¡ Ù 20º+/-2º
From 0º down to -3º ~ -5 º
45 degrees
45 degrees
0~110 mm
0~90 degrees (Clockwise)
PC+ABS (meets UL94V0 degree)
PC+ABS (meets UL94V0 degree)
All internal plastic cabinet components shall be in compliance
with the requirements of TCO'03 (VP191s) / TCO'99
(VP191b/VP191b-H)
The reference for the bezel is the Silver (VP191s) / Midnight-
Gray (VP191b/VP191b-H) color chip provided by ViewSonic
The color difference between any two cabinet
components shall be less than 0.80 "Delta E",
in the 1976 CIE L*a*b Colorspace.
The reference for the Neck, Base, Speaker Cover, Rear Cover
and Rear Logo Color is the Black (VP191s) / Midnight-Gray
(VP191b /VP191b-H) color chip provided by ViewSonic.
The color difference between any two cabinet
components shall be less than 0.80 "Delta E",
in the 1976 CIE L*a*b Colorspace.
The color drift due to UV-Light shall be less than 3.0 "Delta
E" in the 1976 CIE L*a*b colorspace.
performed according to the requirements of ASTM Test
Method D4459-93.
Mold-Tech # 11010 used on all external textured surfaces.
The supplier shall submit textured color chips, plastic material
specifications, and Material Safety Data Sheets for approval.
Confidential - Do Not Copy
10
Testing shall be
VP191b/s