Diagram A
Diagram B
Mounting 7 Button PIN Pad:
The small 7 button PIN pad will be mounted internally somewhere so it is in a
convenient location to enter your PIN number. Some common locations are on
or near the control panels of RV's, Ice Houses or Garages. This panel will
usually consist of power on/off switches for the lights, generators and other
displays. This is a good location to mount the PIN pad.
1.
Use an alcohol based cleaning solution to clean the backside of the PIN
pad and the exact location you tend to target for mounting, let dry completely
(Raw wood typically is not a good mounting medium).
2.
Using the high‐strength double stick tape (provided), cut the
appropriate size for the PIN pad. Peel the plastic backing off one side of the
tape, apply to the back of the PIN pad and press firmly for 20 seconds (Diagram
A). Then peel the remaining plastic backing off and using both hands place in
the desired mounting location and press firmly for 20 seconds. This will
complete the installation of the PIN pad (Diagram B).
3.
Refer to the Owner's Manual for operating, pairing and programming
features.
Remote Key FOB:
1.
No action is required see Owner's Manual for operating, pairing and
programming features.
4