JVC HR-XVC25U User Manual page 34

Timer-recording
Timer recording special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MO-SA: Monday to Saturday) timer recording
Follow the procedure of timer recording on the previous
page. At picture 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the indicator at
DATE will change as follows, in this case the today is
Friday.
The current day (Friday)
One month later
minus one day
WKL-WE
(Weekly Wednesday)
á
In case timer programs-overlap
•
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
8 : 00
Program 1
Program 2
Program 3
Recording
Prog.1
Control Settings
NOTES:
•
The daily/weekly recording can be made continu-
ously until the recording is canceled or the tape
reaches the end.
•
During timer recording the automatic rewinding
mechanism does not function.
34
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-TH (Weekly Thursday)
ñ
9 : 00 10 : 00
11 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Confirmation / Cancellation of the timer
recording
1
If the timer has been activated, press TIMER to
deactivate the timer. The clock symbol (
disappear. Then press VCR to change to VCR
mode.
2
To confirm timer program:
At picture 1 on the
previous page select the
"TIMER REC SET" option
and press ENTER.
Then the timer program
list as right will appear on
the screen.
3
To cancel timer program:
Press SET + or – to
select the unnecessary
program, then press
CANCEL to cancel the
program.
4
Press SET UP MENU repeatedly until the TV-picture
appears.
NOTES:
•
If there are other timer record programs remaining,
TIMER must be pressed to reactivate the timer,
otherwise the remaining timer record programs will
be ignored.
• You cannot confirm the timer program during timer
recording operation.
•
You can also correct the programmed setting in
program confirm mode.
At step 2 above, press ENTER to enter the program
input mode. Then press ENTER repeatedly until the
item you wish to correct
blinks. Then correct the data
with SET + or –.
Then press SET UP MENU
repeatedly until the TV-
picture appears.
) will
á ñ
á ñ
á ñ