Samsung TX20C53X/XET Service Manual page 17

4-2-23 Plate Ground Deck, Cylinder Ass'y Removal
1) Remove the 3 Screws Œ.
2) Lift the Plate Ground Deck ´.
3) Lift the Cylinder Ass'y ˇ.
Assembly :
1) Match the 3 holes in the bottom of Cylinder ass'y
ˇ to the 3 holes of Main Base as attending not to
drop or knock the Cylinder ass'y ˇ.
2) Tighten the 1 Screw Œ.
3) Match the Plate Ground Deck ´ to the Hole of
Base Main.
4) Tighten the other 2 Screws Œ.
Note :
1) Take care not to touch the Cylinder Ass'y ˇ and
the tape guide post at reinstalling.
2) When reinstalling, Don't push down too much on
Screw Driver.
Fig. 4-29 Plate Ground Deck, Cylinder Ass'y Removal
Samsung Electronics
Π3 SCREWS
´ PLATE GROUND DECK
ˇ CYLINDER ASS'Y
4-2-24 Belt Pulley Removal
1) Remove the Belt Pulley Œ.
Note : Take extreme care not to get grease on Belt
Pulley Πat assembling or reassembling.
ΠBELT PULLEY
Fig. 4-30 Belt Pulley Removal
1-2-25 Level Head Cleaner Ass'y Removal
(Optional)
1) Release the Hook Œ.
2) Lift the Lever Head Cleaner Ass'y ´.
Fig. 4-31 Level Head Cleaner Ass'y Removal
Disassembly and Reassembly
´ LEVER HEAD CLEANER ASS'Y
ΠHOOK
SLEEVE-HEAD CLEANER
4-15