Mode Set (Dvd Deck) - JVC HR-XV3E Instructions Manual

Mode Set
(DVD deck)
You can change various mode settings on the Mode Set
screen by following the procedure described below.
For each mode setting, see pages 66 to 67.
LANGUAGE
PICTURE
AUDIO
OTHERS
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/VCR/DVD switch to the right.
MENU LANGUAGE ( pg. 16)
AUDIO LANGUAGE ( pg. 16)
SUBTITLE ( pg. 16)
ON SCREEN LANGUAGE (
MONITOR TYPE ( pg. 14)
PICTURE SOURCE ( pg. 66)
SCREEN SAVER ( pg. 66)
MP3/JPEG ( pg. 66)
DIGITAL AUDIO OUTPUT (
ANALOG DOWN MIX ( pg. 66)
D. RANGE CONTROL ( pg. 66)
OUTPUT LEVEL ( pg. 66)
RESUME ( pg. 67)
ON SCREEN GUIDE ( pg. 67)
PARENTAL LOCK ( pg. 44)
The procedure shows how to set "RESUME" to "ON"
on the DVD Set Up menu screen as an example.
A
Turn on the unit.
Press 1.
B
Select the DVD deck.
pg. 16)
On the unit
Press VCR/DVD repeatedly so that the DVD indicator
lights up.
On the remote control
Press DVD so that the DVD indicator lights up.
C
pg. 66)
Access the DVD Set Up menu screen.
A Press SET UP MENU.
B Press w e to select
" OTHERS".
Each time you press the
button, the setup menus
change as follows;
LANGUAGE]
](Back to the beginning)
D
Select the mode.
Press rt to move H to "RESUME", then press OK.
E
Select the mode setting.
Press rt to select "ON", then press OK.
F
Return to the normal screen.
Press SET UP MENU.
OTHERS
RESUME
ON SCREEN GUIDE
PARENTAL LOCK
SELECT
USE
TO EXIT, PRESS [SET UP MENU].
OK
PICTURE] AUDIO ]
65
EN
ON
ON
TO SELECT, USE OK TO CONFIRM.
OTHERS