SmartPets SP 209 User Manual

Pet remote training collar for 2 dogs

Pet Remote Training Collar for 2 Dogs

This is an effective 2 pets training system, specially designed for those who wish to train

up to 2 dogs simultaneously and independently. It also can train 2 dogs at the same time.

It features an easy-to-use transmitter, 100 different levels static shock; 100 different

levels vibration, replaceable batteries and 300 meters range.

Contents:

 1 x Transmitter (Controller)

 2 x 6V 4LR44 Batteries (for Transmitter)

 2 x Adjustable Collar Straps (for Receivers)

 1 x 2 Receivers

 4 x 1.5V AAA Batteries (for Receivers)

 2 x 2 Pair of Electrodes (for Receivers)

 2 x 1 Test Light (for test static shock function)

 1 x User Manual

LAVA Electronics Inc. Tel: 1-909-923-87743, Email: ismartpets@gmail.com www.lavasat.com

User Manual

Model: SP 209

Table of Contents

Need help?

Do you have a question about the SP 209 and is the answer not in the manual?

Page 1 Pet Remote Training Collar for 2 Dogs User Manual Model: SP 209 This is an effective 2 pets training system, specially designed for those who wish to train up to 2 dogs simultaneously and independently. It also can train 2 dogs at the same time.
Page 2 Quick start Guide Step 1: Prepare the Remote Transmitter Follow the positive (+) and Negative (-) signs inside the transmitter. Insert the 2 x 6V 4LR44 Batteries into the transmitter correctly. Step 2: Match Transmitter with the Collar Receivers 1. Follow the Positive (+) and Negative (-) signs inside the 1 Receiver.
Page 3 Step 3: Install the Electrodes for the Receiver. Randomly pick one pair of electrodes and screw for receivers. (Please pick the same size electrodes for each receiver.) Step 4: Adjust the collar to fit your pets. To ensure a proper fit, please follow the steps below: 1.
Page 4 How to check the static shock function 1. Use the Test Light attach on the both side of Electrodes (Metal). 2. Switch to the static shock function and select a low level of the static shock. 3. Press Y Button, the Test Light will blink or keeps on.