SmartPets SP 706 User Manual

No Bark Static Shock Training Collar

Contents:

 1 x No Bark Collar Device
 1 x 4LR44 6V Battery
 1 x Test Light
 1 x User Manual

Quick start Guide

Step 1: Prepare the Device

Follow the Positive (+) and Negative (-) signs inside of device and put the 4LR44 6V
battery into device. The LED indicated will not light up when you put the battery
inside of the device. The LED indicated light only lights up when the device is beep
or start shocks.

Step 2: Test the Device

1. Put the Test Light on the Electrodes of device. (Both side touch the METAL)
2. Turn the adjustment of sensor (dial) to the highest level, and blow some air
into the Sensor.
3. The device will beep and the LED indicated light will light up for the first two
times. (beep increase)
4. The Third time, the device will beep and static shock after beep. The Test
Light will be blinking or lights up after the beep. (If there is no static shock
the Test Light will not light up or blinking).
LAVA Electronics Inc. Tel: 1-909-923-8743, Email:
1
LAVA Electronics Inc. Copyright 2009, All Rights Reserved
User Manual
ismartpets@gmail.com
Model: SP 706
www.lavasat.com