Specifications - OTS DRS-100 Mod B User Manual

1.1

SPECIFICATIONS

Input voltage:
Input current:
Idle current:
Audio power (PEP*):
Frequency response:
Recall oscillation rate:
Beam pattern:
Transducer cable:
Transducer:
Fuse type:
Transducer:
Low-battery LED:
Battery type:
Battery life:
Microphone type:
Size:
Weight:
Battery charging time:
RCS-30 smart charger:
* Peak envelope power
24 VDC
7 amps maximum
75 mA
Recall & tone: 132 watts
Voice:
500–4000 Hz
5 Hz
Omnidirectional
25 feet in length
Anodized aluminum
6 amps, slow-blow (use slow-blow fuse only)
Size: 9 in. diameter, 6 in. axial length
Weight: 13 lbs. in air, 2 lbs. in water
Flashes at approximately 20 volts
Two 12-volt, 2.6 amp-hour, maintenance-free re-
chargeable cells (in series)
5 hours at 20% duty cycle (Recall/Tone mode)
3 hours nominal when using auxiliary input (medium
volume)
Push-to-talk, front panel (optional hand-held with
PTT available)
Depth: 10.6 in. (including handle and hinges)
Length: 14 in.
Height: 4.7 in. without cover
6.5 in. with cover
15 lbs.
2-3 hours (the RCS-30 automatically switches to
maintenance mode when the battery is fully charged,
indicated by the LED turning green)
90–260 VAC input; 24 VDC, 1300 mA, 50/60 Hz out-
put
2
132 watts