Page 2
You have just been prescribed Lantus (insu- lin glargine) or Apidra (insulin glulisine) in a ClikStar reusable insulin pen. This quick guide contains information on how to use your ClikStar. You can find more detailed information in the instructions that come in the ClikStar packaging.
Page 3
ClikSTAR and its components Check marking Injection Ampoule sleeve button Protective film Dosage knob Needle (not included) Dose window Inner needle cap Outer needle cap Pen body Check marking Plunger rod Each cylinder ampoule contains 300 units of insulin. The following needles are suitable for use with ClikStar: Protective sleeve •...
Page 4
How to get started Carry out a safety test prior to each injection Choose a dose of 2 Remove the protec- tive sleeve. Unscrew units by turning the dosage knob. Remove the ampoule sleeve the outer and inner from the pen body. Insert a new cylinder needle caps.
Page 5
Set the dose and inject Once you have injected Set the required dose. Put on the outer If you turn past the unit needle cap and you want to inject, unscrew the needle. simply turn back to the Dispose of the needle correct unit.
Page 6
Tips and advice Before use When the insulin is getting low, you can see on the cylinder ampoule’s graded scale rough- • Always attach a new needle before each ly how much insulin is left. This scale only injection. gives a rough idea of how much is left and •...
Page 8
Frågor om våra insulinpennor: You can find more information about diabetes at www.insulin.se You can also read about different insulins at www.fass.se sanofi-aventis AB, Tel: +46 (0)8 - 634 50 00. www.sanofi-aventis.se If you have any questions about our pharmaceuticals, please contact: infoavd@sanofi-aventis.com Clikstar is CE-marked.
Need help?
Do you have a question about the clickstar and is the answer not in the manual?
Questions and answers