LG MFL62881323 Owner's Manual page 12

Installation Menu
Send To USB
"Send To USB" must be done first before "Receive From USB" process, as it generate the file to be used in
"Send To USB". While writing is in process, the user must not turn TV off nor unplug the USB memory card. The
steps in "Send To USB" are explained below. The following images might be slightly different than the OSD image.
Plug in USB memory card into the port on target TV.
1
Send To USB
Select the file name and press OK to start
Previous
1
MENU
Receive From USB
Once the internal TV data and its channel map information is written to the USB memory card, the user can start
"Receive From USB" process with the data file generated and stored in USB memory card. As previously warned in
"Send To USB" process, the user should not turn TV off nor unplug the USB memory card. Detailed steps for
"Receive From USB" are illustrated below. The following images might be slightly different than the OSD image.
1
Receive from USB
42LD420C-EU00001.TLL
Previous
1
2
OK
10
D
42LD420C-ZA00001.TLL
OK
Choose a file to be written to
the target TV
2
Saving 42LD420C-ZA00001.TLL ... 87%
The process will be shown with progress bar,
and as soon as sending the current profile is
finished, a message acknowledging the learn-
ing process is complete will pop up.
2
Saving 42LD420C-ZA00001.TLL ... 87%
OK
The process will be shown with progress bar,
and as soon as teaching the current profile is
finished, a message acknowledging the
teaching process is complete will pop up.
3
TV turns off automatically after completion of
data sending.