Advertisement
SAFETY INSTRUCTIONS:
Before turning on the power of power wheelchair WH-E100-1, please read the user manual and pay attention to the
following safety
The weight limit of WH-E100-1 is 100 kg. For safety reason, make sure that your weight does not exceed the
recommended weight limit of the wheelchair WH-E100-1.
Please do not use WH-E100-1 on the lawn, sands, beach, and other uneven surfaces. Environmental conditions may
affect the safety and performance of your power wheelchair. Water and extreme temperatures can cause damage and
affect power wheelchair performance.
Please follow the safety instructions of general manual wheelchair. Failure to follow the instructions listed in the user
manual may cause damage and could void the power wheelchair warranty.
OPERATION INSTURCTIONS:
1. When the release bar is set at the upper position (shown in figure 1), the WH-E100-1 is in the manual mode.
2. When the release bar is set at the lower position (shown in figure 2), the WH-E100-1 is in the power mode. The battery
condition meter will blink in the controller.
3. When the footrest frame pin is raised as indicated in figure 3, the footrest can be removed or turn around 90 degree to
correct direction (shown in figure 4).
4. When the footrest frame pin is raised as indicated in figure 3, the footrest can be removed or turn around 90 degree to
correct direction (shown in figure 4).
5. The height of footrest can be adjusted according to the users' need when the pin is pulled out (shown in figure 5).
6. When the knob is pulled out, the armrest can be detach and flip-up (shown in figure 6)
User manual of power wheelchair WH-E100-1
figure 1
figure 3
figure 2
figure 4
Advertisement
