DeWalt D26441 Owner's Manual page 10

E N G L I S H
Sanding (fig. A)
• Start with the coarsest grit size.
• As the tool produces small scratch marks in all
directions, it is not necessary to sand with the
grain.
• Check your work at short intervals.
• Always switch off the tool when work is finished
and before unplugging.
Emptying the dustbag (fig. C)
For efficient dust extraction empty the dust collector
when it is about one third full.
• To empty the dust collector, pull it off together
with the adaptor.
• Remove the dustbag (7) from the adaptor (6) by
turning it counter-clockwise and pulling it off.
• Empty the contents of the bag into a waste
container. If necessary, use a vacuum extractor
to clean the dustbag, applying suction to the
interior surface.
• Re-fit the dust extraction adaptor.
• Re-fit the dustbag.
Consult your dealer for further information on the
appropriate accessories.
Maintenance
Your D WALT power tool has been designed to
E
operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean
the housing with a soft cloth.
• After the tool is used in metal sanding
applications without dustbag, clean the tool
using low-pressure air.
10
Protecting the environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces the
demand for raw materials.
Service Information
D WALT offers a full network of company-owned
E
and authorized service locations throughout Asia. All
D WALT Service Centers are staffed with trained
E
personnel to provide customers with efficient and
reliable power tool service. Wether you need
technical advice, repair, or genuine factory
replacement parts, contact the D
nearest to you.
Notes
-
D WALT's policy is one of continuous improve-
E
ment to our products and, as such, we reserve
the right to change product specifications without
prior notice.
-
Standard equipment and accessories may vary by
country.
-
Product specifications may differ by country.
-
Complete product range may not be available in
all countries. Contact your local D
for range availability.
WALT product
E
WALT location
E
WALT dealers
E