Network Setup Steps - NetComm Wireless 3GM2WN Setup Manual

For steps 5 – 16, refer to the image below
5. In the Country field, select the country you are in. (e.g. Australia)
6. In the Service Provider field, select Bigpond. The APN field will automatically populate
itself.
7. In the APN field, ensure that Telstra.bigpond is typed.
8. Keep the PIN field blank unless instructed by Bigpond.
9. In the Dialed Number field, type in *99#
10. In the Username field, type in your Bigpond e-mail address. (e.g. abc@bigpond.com)
11. In the Password field, type in the password for your Bigpond account.
12. In the Authentication Type field, select Auto.
13. Keep the Primary DNS and Secondary DNS fields blank unless otherwise stated by
Bigpond.