Dvd-Videos Parental Lock Level - JVC DR-M70SEK Instructions Manual

DVD-Videos Parental lock level

Some DVD-Videos feature a Parental Lock function.
If the rating of the inserted disc exceeds the level you
set, playback will stop. You must enter a password
before the disc will be played back. This feature
prevents your children from viewing inappropriate
material.
1
In stop mode, press [SET UP].
2
Select "Advanced Setting Menu"
using [Cursor U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3
Select "Playback" using
[Cursor U / D], then press [ENTER].
4
Select "Parental Lock" using
[Cursor U / D], then press [ENTER].
Playback
TV Aspect
Parental Lock
Disc Menu Language
Audio Language
Subtitle Language
Digital Out
Dynamic Range Control
Fast Forward with Audio
Video Out
Note
• The parental lock function may not be available on
some discs.
• It may be difficult to determine if some DVDs
support the parental lock function. Be sure to
confirm that the parental lock function operates in
the way that you have set.
• Record the password in case you forget it.
Parental Lock (Default: All)
Set the Parental Lock level.
Change the Parental Lock level using
[Cursor U / D], then press [ENTER].
Proceed with either of the following steps.
Parental Lock Parental Lock
All All
All All
8 8
7 7
6 6
5 5
4 4
3 3
2 2
1 1
58
EN
16:9 Wide
All
English
Original
OFF
ON
ON
Change the password.
5
Parental level
All: All parental locks are cancelled.
8: DVD software of any grade (adult /
general / children) can be played back.
7 to 2: Only DVD software intended for general
use and children can be played back.
1: Only DVD softwares intended for children
can be played back.
A password is not yet set
Select "Yes" using [Cursor U / D],
then enter a new password using
[the Number buttons], then press
[ENTER].
Your setting is activated.
If you select "No", proceed to Step 5.
A password is already set
Enter the current password using
[the Number buttons].
Parental Lock
Password Input
Parental Lock
Change Password?
Yes
No
Select "Yes" using [Cursor U / D],
then enter a new password using
[the Number buttons], then press
[ENTER].
Your setting is activated.
If you press [ENTER] without entering a
password, you can set up without a password.
Press [SET UP] to exit.