Table of Contents
Advertisement
Changing the light bulb
,
WARNING
To reduce the risk of electric shock,
disconnect this appliance from the power
supply by unplugging or tripping the
circuit breaker.
^ Open the drum door.
^ Unscrew the plastic bulb cover located
inside the drum and above the door (see
illustration.)
^ Replace the light bulb with a temperature
proof bulb available from Miele's Technical
Service Department.
The light bulb must not exceed the
maximum wattage quoted on the data
plate.
^ Refit the plastic bulb cover.
Take care that the bulb cover is tightened
into place. Otherwise moisture may
penetrate the socket and cause a short
circuit.
Cleaning and Care
Power failure - Emergency door
release
^ Pull forward on the unhinged side of the
door with the supplied yellow plastic tool.
Air intake opening
The dryer air intake opening is located at the
rear. Do not cover the opening!
13
Advertisement
Table of Contents
