Description Of Main Items - Sony FWD-42PV1 Service Manual

2-1-3. Description of Main Items

1. AD CALIBRATION
PC.CUTOFF: Sets Cut Off of PC mode.
PC.GAIN: Sets Gain of PC mode.
DTV.CUTOFF: Not used
DTV.GAIN: Not used
CONT.R: Not used
CONT.G: Not used
CONT.B: Not used
BRT.R: Not used
BRT.G: Not used
BRT.B: Not used
2. WHITE BALANCE
COLOR TEMP: Sets color temperature (11000, 9300,
6500).
R-GAIN: Sets Red Gain (contrast).
G-GAIN: Sets Green Gain (contrast).
B-GAIN: Sets Blue Gain (contrast).
R-OFFSET: Sets Red Offset (brightness).
G-OFFSET: Sets Green Offset (brightness).
B-OFFSET: Sets Blue Offset (brightness).
SUB-OFFSET: Not used
SUB-GAIN: Not used
3. INITIALIZATION
EEPROM INIT.: Initializes EEPROM to default data.
EXCEPT WB: Initializes data except white balance.
ONLY WB INIT: Initializes white balance data only.
ELAPSED TIME: Initializes Operation Time.
SERIAL NO.: Initializes Serial Number.
MODEL NAME: Initializes Model Name.
FILL 0xFF: Initializes EEPROM to 0xFF.
SERIAL MODE: Sets Serial Mode to communicate with
the set by using RS-232C.
The RS-232C protocol shall be set to
SONY.
SONY: This is for user to control the set by
using RS-232C as remote controller.
LG: This is for setting white balance.
ETC: This is for developer.
4. FOR TEST
AGING ON/OFF: Sets Aging Mode on/off.
FAN ON/OFF: Sets fan on/off.
INIT GOODS: Initializes whole data for user to be
able to use the set.
2-2
5. FOR SONY
S-INIT GOOD: Initializes whole data except Operation
Time for user to be able to use the set.
FAN FOR TEST: Sets fan on/off.
n
This mode is used for the check in
service. The fan is stopped under
normal condition. It operates when the
temperature inside of this unit rises.
SELECT RS232C: Select V-net (Slot1/Slot2)
6. WB DEFAULT DATA
PC: Not used
VIDEO: Not used
DTV: Not used
DVI: Not used
COPY WB DATA: Not used
FWD-42PV1/42PV1P/42PV1A