Advertisement
Start-up menu
PRIORITY
MAIN DISPLAY
SUB DISPLAY
,
,OK
BACK
12
You access the start-up menu by pressing
the control button with the TFT display
switched on and while the Gira door com-
munication system is in programming
mode. To start programming mode, press
the "Systemprogr." button at the control
device for 3 seconds until the yellow LED
next to the "Systemprogr." button flashes.
The following setting options are available
in the start-up menu:
Priority
Factory setting: Main display.
●
If several video displays (TFT display,
VideoTerminal or TV Gateway) are oper-
ated in one flat, a maximum of one device
may serve as the main display per call but-
ton; the others are defined as sub dis-
plays. The main display is automatically
switched on with an incoming door call.
The sub displays are only switched on or
off with call acceptance at the home sta-
tion after a door call or with the On/Off
button.
Advertisement
