Advertisement
Quick Links
Advertisement
Summary of Contents for Gira 1286 Series
- Page 1 Operating Instructions TFT colour display 1286 ..
- Page 3 Device description The TFT colour display is part of the Gira door communication system and is used for the expansion of the home stations. Menu The high-resolution active TFT colour dis- play features LED backlighting. The status indication and menu guidance occur via text presentations in the TFT dis- play (OSD function).
- Page 4 Installation Attention Installation and mounting of electrical devices may only be carried out by a qualified electrician. The TFT colour display is operated together with a home station. Video System 1. Insert the 6-pole connection cable into a system slot of the home station. 2.
- Page 5 4. Insert both connectioncables into the display insert. Colour marking on display insert and top unit To avoid mix-ups, the display inserts and top units are marked with a blue dot. 5. Install the display insert. 6. Set down the cover frame and attach the TFT display and the other inserts of the home station to the flush- mounted inserts.
- Page 6 Structure of the menu interface Menu title Scroll symbols Selection MENU symbol BRIGHTNESS CONTRAST Action COLOUR features control button BACK Menu Action feature On/Off button Menu title The menu title indicates the current menu item (main menu in this case). Scroll symbols The scroll symbols indicate the direction in which you can navigate with the control...
- Page 7 Selection symbol The selection symbol indicates the menu item that you have just selected with the control button. In this example, pressing the control but- ton in the centre calls up the "Colour" menu item. Action features control button The presently available control-button actions are displayed here.
- Page 8 Operating elements On/Off button With the On/Off button, you can specifi- cally switch the TFT colour display and the corresponding colour camera on and off, and switch between several colour cam- eras. To switch on, briefly press the On/Off but- ton.
- Page 9 In menu mode, the On/Off button func- tions as a "back button", i.e. pressing this button moves you one step back in the menu or the menu is exited. Note If a menu is exited with the "back button", changes are not accepted. Control button (menu) Control button with 5-way navigation for the directions up, down, left, right and...
- Page 10 Setting menu You access the setting menu by pressing the centre of the control button with the TFT display switched on. The following setting options are available in this menu: Brightness You set the display brightness with the BRIGHTNESS control button here. Confirm the brightness setting by press- :::: ■...
- Page 11 Information about the menu items "Brightness", "Contrast", "Colour" Settings can only be carried out for "Brightness", "Contrast" and "Colour" if a colour camera has been previously selected. These settings only apply to the connec- tion from active TFT display to active colour camera in each case.
- Page 12 Start-up menu You access the start-up menu by pressing the control button with the TFT display switched on and while the Gira door com- munication system is in programming mode. To start programming mode, press the "Systemprogr." button at the control device for 3 seconds until the yellow LED next to the "Systemprogr."...
- Page 13 Frequency The optimum frequency of the video sig- FREQUENCY nal of the currently active transfer path is set for fine-tuning of the video signal :::::::: ■ between the camera and the display using BACK the control button . Setting with several TFT displays and colour cameras The frequency setting applies only for the...
- Page 14 Illumination Factory setting: Auto ILLUMINATION ● AUTO The behaviour of the field of view illumina- tion of the colour camera is set here. BACK Auto: The field of view illumination of the colour camera is switched on for a door call or with manual switching on of the TFT display if the ambient brightness is less than 1 lux.
- Page 15 Display Factory setting: On DISPLAY ● Here you set whether the TFT display can be switched on via the On/Off button. BACK On: The TFT display is switched on either after a door call or via the On/Off button. Off: The TFT display is only switched on after a door call.
- Page 16 Default setting The settings are restored to the factory DEFAULT SET. ● DISPLAY settings here. DELETE CAMS A differentiation is made between: Display: Here the values of the menu BACK items Priority, Resistor, Display, Lan- guage, Brightness, Contrast, Colour and Switch-on time are reset to the factory setting.
- Page 17 Once you have executed this function, the cameras must be registered again: for this purpose, start the programming mode on the control device and press any call but- ton on all door stations with a colour cam- era for 3 seconds each. Important: Go through the door stations in the order which is to be displayed later in the TFT display (e.g.
- Page 18 Technical data Power supply: via system bus Connections display insert: 2 connector strips system bus 1 connector strip video 1 connector strip for future applications. Colour system: Number of pixels: System55: 640 x 480 (H x V) F100: 960 x 240 (H x V) Temperature range: 5 °C to + 50 °C...
- Page 19 Please submit or send faulty devices post- age paid together with an error descrip- tion to your responsible salesperson (spe- cialist trade/installation company/ electrical specialist trade). They will forward the devices to the Gira Service Center.
- Page 20 Gira Giersiepen GmbH & Co. KG Elektro-Installations- Systeme Postfach 1220 42461 Radevormwald Deutschland Tel +49 (0) 21 95 / 602 - 0 Fax +49 (0) 21 95 / 602 - 191 www.gira.de info@gira.de...