Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Black & Decker CD18QC
Summary of Contents for Black & Decker CD18QC
- Page 1 ® CD18QC 18V CORDLESS DRILL...
-
Page 3: Technical Data
ENGLISH the risk of electric shock. CD18QC d. Do not abuse the cord. Never use the cord for 18V CORDLESS DRILL carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. TECHNICAL DATA Damaged or entangled cords increase the risk of electric shock. -
Page 4: Australia And New Zealand
ENGLISH c. Disconnect the plug from the power source and/or intended for use by young children or infirm persons the battery pack from the power tool before making without supervision. Young children should be supervised to any adjustments, changing accessories, or storing ensure they do not play with this appliance. -
Page 5: Specific Safety Rules
ENGLISH 5. Keyless Chuck Do not expose the charger to water. • 6. Bit Holder • Do not open the charger. 7. Battery • Do not probe the charger. 8. Battery Release Button LABELS ON THE CHARGER BATTERY CAP INFORMATION- FIG. B The following symbols are found on your charger: Battery storage and carrying caps are provided for use Your charging base is double insulated;... -
Page 6: Charging The Power Pack
ENGLISH 9. Use only the supplied charger when charging your drill. below 40°F or above 105°F. This is important and will The use of any other charger could damage the drill or prevent serious damage to the power pack. Longest life create a hazardous condition. - Page 7 ENGLISH as a lock off button. To select forward rotation, release the insert a screwdriver bit into the Quick Connect trigger switch and depress the forward/reverse control shaft, push the bit in until you hear it click into place. button.To select reverse, depress the forward/reverse 2.
-
Page 8: Maintenance
ENGLISH Drilling in Masonry transportation prepaid, to any Black & Decker Service Centre, or any authorised service station. Use carbide tipped masonry bits. Refer to Drilling section. For warranty repair information, call (Australia) 1800 654 Keep even force on the drill but not so much that you crack 155 or (New Zealand) 0800 339 258.