1. Manuals
  2. Brands
  3. Digital Electronics Corporation Manuals
  4. Monitor
  5. Pro-Face FP3700-T41
  6. User manual

Digital Electronics Corporation Pro-Face FP3700-T41 User Manual

Tft type color display panel
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FP3700-T41

User Manual

Digital Electronics Corporation

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pro-Face FP3700-T41 and is the answer not in the manual?

Questions and answers

Related Manuals for Digital Electronics Corporation Pro-Face FP3700-T41

Summary of Contents for Digital Electronics Corporation Pro-Face FP3700-T41

  • Page 1: User Manual

    FP3700-T41 User Manual Digital Electronics Corporation...
  • Page 2 Preface Preface Thank you for purchasing Digital’s TFT type color display panel, the 'FP3700- T41' (hereafter referred to as the FP unit). ® The FP unit is a TFT type color liquid crystal display monitor for Windows compatible personal computers (XGA mode).

  • Page 3: Essential Safety Precautions

    Indicates a word or phrase that has an additional explanation. A reference point. Describes the word or phrase marked by the aster- isk (*) and the corresponding number. Indicates related information. Operational steps. Please follow these numbered steps in order to perform the desired operation. FP3700-T41 User Manual...
  • Page 4 OFF, and the screen has gone blank, your backlight is burned out. 2) If your current FP application is set to turn the backlight OFF, if touching the screen does not cause the display to reappear, your backlight is burned out. FP3700-T41 User Manual...
  • Page 5 • When using the FP with transportation vehicles (trains, cars and ships), disaster and crime prevention devices, various types of safety equipment, non-life support related medical devices, etc, redundant and/or failsafe system designs should be used to ensure the proper degree of reliability and safety. FP3700-T41 User Manual...
  • Page 6 • When the product is disposed of, it should be done so according to your country's regulations for similar types of industrial waste. FP3700-T41 User Manual...

  • Page 7: General Safety Precautions

    Preface General Safety Precautions Notes on the FP's Liquid Crystal Display (LCD) For detailed LCD information, Please contact Digital’s Development department, Product Quality Assurance group. • The FP's LCD contains a strong irritant. If the panel is dam- aged and the LCD unit's liquid contacts your skin, be sure to wash it with running water for at least 15 minutes.

  • Page 8: Table Of Contents

    Essential Safety Precautions ................ii Documentation Conventions ................ii General Safety Precautions ................vi Connecting the FP to a PC ................ix FP3700-T41 Features ..................x What is IP65f? ....................xi Package Contents .................... xii UL/c-UL (CSA) Application ................xiii CE Marking ....................
  • Page 9 Preface FP Dimensions .................... 2-14 2.6.1 FP3700-T41 External Dimensions ........... 2-14 2.6.2 FP3700-T41 External Dimensions (with Installation Fasteners) ..2-15 2.6.3 Installation Fasteners ............... 2-16 2.6.4 FP Installation Dimensions ............... 2-16 CHAPTER 3 INSTALLATION AND WIRING Installation ....................3-1 3.1.1 Installation Procedures ............... 3-1 Wiring ......................

  • Page 10: Connecting The Fp To A Pc

    Some types of VGA equipment may not be within the ranges specified above, and, therefore, cannot be connected to the FP. Also, if you change your PC's VGA board, there is the possiblity that the new board may not be able to be connected to the FP. FP3700-T41 User Manual...

  • Page 11: Fp3700-T41 Features

    Easy Installation In User’s Cabinets and Panels The FP3700-T41's slim and compact design makes installation a snap since it was designed specifically for use as an IA (Industrial Automation) or OA (Office Automation) system monitor. The flat, front panel provides protection equivalent to the rigorous IP65f standard.

  • Page 12: What Is Ip65F

    (4) Indicates the degree of protection provided by the unit's front face from oil particle intrusion into the interior of the unit. Here, "f" indicates that the unit is completely protected from oil intrusion via either oil particles or oil splashes from any direction (to the front panel). FP3700-T41 User Manual...

  • Page 13: Package Contents

    FP unit (FP3700-T41) FP3700 User Manual CD-ROM (1) User Manual Installation Gasket (1) Installation Fasteners (8: 4 x 2 set) FP3700-T41 Installation Guide (1) AC Power Cord(1) Cord Clamp(1) Installation USB Cable Strap(1) Guide The Power Cord included in the FP unit's package is designed only for AC100V or AC115V use.

  • Page 14: Ul/C-Ul (Csa) Application

    FP unit's internal components may cause the unit to fail to meet UL/c-UL standard requirements. CE Marking The FP3700-T41 is a CE marked product that conforms to EMC directives and Low Voltage directives EN55011 Class A, EN61000-6-2 and EN60950-1 First Edition.
  • Page 15 Preface Memo FP3700-T41 User Manual...

  • Page 16: Chapter 1 Introduction

    The FP unit’s dip switches set the type of cable(s) used for sending touch data and commands (USB or RS232C), and also for outputing image signals (DVI-D or Ana- log RGB). 3.3 Operation Mode Setup and Display Positioning FP3700-T41 User Manual...

  • Page 17: Optional Equipment

    1.2 Optional Equipment Optional Equipment All optional items listed below are products of Digital Electronics Corporation. Item Model Description Serial interface cable (5m) used for touch panel data transmission between the host RS-232C Cable FP61V-IS00-O and the FP or command transmission to the FP.

  • Page 18: Chapter 2 Specifications

    10Hz to 25Hz 4.9m/s Vibration Resistance X, Y, Z directions (30min.) Noise Voltage: 1,500Vp-p Noise Immunity Pulse Duration: 1 µ s, 500ns, 50ns (via noise emulator) Rise T ime: 1ns Electrostatic Discharge 4kV (complies with EN 61000-4-2 Level 3) Immunity FP3700-T41 User Manual...

  • Page 19: Structural Specifications

    If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the panel, the original level of the protection cannot be guaranteed. To maintain the original protection level, you need to replace the installation gasket regularly. FP3700-T41 User Manual...

  • Page 20: Functional Specifications

    *2 The brightness at the central part of the screen when displaying a completely white screen. This value is only for reference and not a guaranteed value. *3 50% decreased brightness indicates the backlight needs to be replaced. This value is only for reference and not a guaranteed value. FP3700-T41 User Manual...

  • Page 21: Interface Specifications

    48.363 60.004 65.000 ×1.0 1024×768 1024×768 56.476 70.069 75.000 1024×768 60.023 75.029 78.750 *1 When you use this resolution, select "720 x 400 Display Resolution 720 x 400 DSP" in the OSD (On Screen Display) system setting. FP3700-T41 User Manual...
  • Page 22 Mini Dsub 15 pin male Connector set screw: Inch type (4-40) Cable: RGB cable manufactured by Digital Electronics Corporation of Japan FP-CV02-45 <4.5m> (VGA standard) If a cable other than the specified RGB cable is used, product perfor- mance cannot be guaranteed due to the possibility of noise interfering with the FP unit's operation.

  • Page 23: Dvi-D Interface

    48.363 60.004 65.000 ×1.0 1024×768 1024×768 56.476 70.069 75.000 1024×768 60.023 75.029 78.750 *1 When you use this resolution, select "720 x 400 Display Resolution 720 x 400 DSP" in the OSD (On Screen Display) system setting. FP3700-T41 User Manual...
  • Page 24 DVI-D 24-pin male Connector set screw: Inch type (4-40) Cable: DVI-D cable manufactured by Digital Electronics Corporation of Japan (FP-DV01-50 <5 m>, FP-DV01-100 <10 m>) • If a cable other than the specified DVI-D cable is used, product perfor- mance cannot be guaranteed due to the possibility of noise interfer- ing with the FP unit's operation.

  • Page 25: Rs-232C Interface

    Connector: Dsub 9 pin female Connector set screw: Inch type (4-40) Cable: SIO cable manufactured by Digital Electronics Corporation of Japan (FP61V-IS00-O) *1 CD, DTR, and DSR are connected together inside of the FP. Concerning Signal Names Signal names used for the serial interface on FP units are designed to match the pin order used on most PC serial interfaces, so that a straight cable can be used to connect the two.

  • Page 26: Usb Interface

    Connector : B type connector Cable : USB cable manufactured by Digital Electronics Corporation of Japan (FP-US00) If a cable other than the specified USB cable is used, product perfor- mance cannot be guaranteed due to the possibility of noise interfering with the FP unit's operation.

  • Page 27: Cable Diagrams

    Inch is used for the pitch of the connector screw on the PC. For this reason, inch (4-40) is also used for the pitch of the connector screw for the cable and the FP. 2-10 FP3700-T41 User Manual...

  • Page 28: Dvi-D Interface Cable Pin Connections (Option Cable)

    Inch is used for the pitch of the connector screw on the PC. For this reason, inch (4-40) is also used for the pitch of the connector screw for the cable and the FP. The FP-DV01-100 cable's 6, 7, 14 and 15 pins are not connected. FP3700-T41 User Manual 2-11...

  • Page 29: Sio Interface Cable Pin Connections

    Input 1 +5VIN Input Output Output +5VIN +5VIN 2 USB- Input/Output 2 USB- Input/Output Input/Output Input/Output USB- USB- 3 USB+ Input/Output 3 USB+ Input/Output Input/Output Input/Output USB+ USB+ 4 GND Input/Output 4 GND Input/Output Input/Output Input/Output 2-12 FP3700-T41 User Manual...

  • Page 30: Names And Functions Of Fp Parts

    Bottom commands from the host. I: Front LED Used to indicate the condition of the power supply, a backlight burnout or image signal input. 3.3.2 Status of Front LED in Op- eration Modes FP3700-T41 User Manual 2-13...

  • Page 31: Fp Dimensions

    2.6 FP Dimensions FP Dimensions 2.6.1 FP3700-T41 External Dimensions Unit: mm [in.] 383 [15.08] 395 [15.55] 5[0.2] 34.9[1.37] 60 [2.36] Side Front 2-14 FP3700-T41 User Manual...

  • Page 32: Fp3700-T41 External Dimensions (With Installation Fasteners)

    2.6 FP Dimensions 2.6.2 FP3700-T41 External Dimensions (with Installation Fasteners) Unit: mm [in.] 395.4 [15.57] 383 [15.08] 320 [12.6] 395 [15.55] FP3700-T41 User Manual 2-15...

  • Page 33: Installation Fasteners

    • If desired, metal reinforcing strips can be attached to the inside of the panel, near the Panel Cut, to increase the panel’s strength. 2.1.3 Structural Specifications • Create the correct sized opening required to install the FP, using the installation dimensions given. 2-16 FP3700-T41 User Manual...

  • Page 34: Chapter 3 Installation And Wiring

    Inserting it into a corner may lead to its eventually tearing. • To ensure the installation gasket’s maximum level of moisture resis- tance, be sure the gasket’s seam is inserted as shown into the panel’s bottom face. Rear face Gasket FP3700-T41 User Manual...
  • Page 35 For easier maintenance, operation, and improved ventilation, be sure to install the FP at least 100 mm [3.94 in.] away from adjacent structures and other equipment. Unit: mm [in.] Side View Rear View [3.94] [3.94] [3.94] [3.94] [3.94] [3.94] [3.94] FP3700-T41 User Manual...
  • Page 36 (fan, A/C) to ensure the ambient operating temperature is 40 C or below. • When installing the FP vertically, position the unit so that the AC Con- nector is also vertical. FP3700-T41 User Manual...
  • Page 37 (total: 8 slots) Left side Right side Bottom Installation panel Hook 3) Insert each of the fasteners as shown below. Be sure to pull the fastener back until it is flush with the rear of the attachment hole. FP3700-T41 User Manual...
  • Page 38 4) Use a Phillips screw driver to tighten each fastener screw and secure the FP in place. Do not use too much force, since it may damage the FP unit. A torque of only 0.5 N•m is sufficient to tighten these screws. FP3700-T41 User Manual...

  • Page 39: Wiring

    Then, close the Cord Clamp until it clicks into place and locks around the AC Power Cord Collar. The Cord Clamp has four teeth for locking. These are to adjust the amount of grip used to hold the AC Power Cord Collar. AC Plug Collar AC Plug Cord Clamp Figure 1 FP3700-T41 User Manual...

  • Page 40: Power Cable Connection

    USB cable strap Stopper USB cable strap holder Figure 1 USB Cable Strap Removal Feature 3) Push in the cable strap's stopper until the cable strap band is unlocked, then remove the band. 4) Disconnect the USB cable. FP3700-T41 User Manual...

  • Page 41: Connecting The Power Supply

    • Be sure to ground the surge absorber (E1) separately from the FP FP unit unit (E2). • Select a surge absorber lightning that has a maximum surge absorber circuit voltage greater than the power supply's peak voltage. FP3700-T41 User Manual...

  • Page 42: Precautions: Grounding

    3.2.5 Precautions: Input/Output Signal Lines • Input and output signal lines must be separated from operating circuit power cables. • If this is not possible, use a shielded cable and connect the shield to the FP chassis. FP3700-T41 User Manual...

  • Page 43: Operation Mode Setup And Display Positioning

    Switch between analog RGB and DVI-D input. SW1-4 Reserved (Set this switch to OFF) SW1-3 Reserved (Set this switch to OFF) SW1-2 Display/hide the OSD SW1-1 Switch between USB and RS232C for touch panel data transmission. FP3700-T41 User Manual 3-10...
  • Page 44 When the switch is set to ON, DVI-D image input method is used. When the switch is set to OFF, the analog RGB image input method is used. The default setting is OFF. (Analog RGB is used.) FP3700-T41 User Manual 3-11...

  • Page 45: Using The Osd

    OSD as it is for at least 30 seconds. If the OSD is automatically closed after 30 seconds of inactivity, the values set before the OSD was closed will be applied. FP3700-T41 User Manual 3-12...
  • Page 46 Cancels the setting and returns to the upper level. In the main ESCAPE menu, this command closes the OSD. *1 When using DVI-D, the message "DO NOT NEED SETUP DVI-D" is display and no settings are required. FP3700-T41 User Manual 3-13...

  • Page 47: Main Menu

    Cancels the setting and then returns to the main menu. OSDH-POSITION (Analog RGB only) Adjustment buttons Applies the setting and then returns to the main menu. Cancels the setting and then returns to the main menu. FP3700-T41 User Manual 3-14...
  • Page 48 (Default value: OFF <Click sound disabled>) When an input data resolution of 720 x 400 is used in the VGA text mode, set this parameter to ON. For other resolutions, set this parameter to OFF. (Default: OFF) FP3700-T41 User Manual 3-15...
  • Page 49 Applies the setting and returns to the main menu. Cancels the setting and returns to the main menu. In the system setting, touching the value displayed on the panel changes the value of the time period. FP3700-T41 User Manual 3-16...
  • Page 50 If you quit the OSD with the button, the value that you were modifying will be not be retained. Instead, the previously set value will be used. FP3700-T41 User Manual 3-17...
  • Page 51 3.3 Operation Mode Setup and Display Positioning Memo FP3700-T41 User Manual 3-18...

  • Page 52: Chapter 4 Touch Panel Data

    The origin point (0,0) is located in the upper left corner of the screen. (0,0) Screen display origin, with resolution of 1024 x 768, is normally at the up- per left corner of the screen. There- fore, a software to convert the touch coordinates to display coordinates is (1023,1023) needed. FP3700-T41 User Manual...
  • Page 53 11h 0h 17h 1h F4h continuous data output unless finger is released 11h 0h 17h 1h F4h 10h when released, only 1 unit of data is sent FP3700-T41 User Manual...

  • Page 54: Chapter 5 Troubleshooting

    - To prevent an electric shock, be sure the power cord is not connected when wiring the unit. • This section assumes that the FP is the cause of a prob- lem, not the host. When the host is the problem, please refer to its corresponding manual. FP3700-T41 User Manual...

  • Page 55: No Display

    Turn OFF the power switch. Fix the power cable connection. Is the power supply Chapter 3. Instal- cable connected properly lation and Wiring to the unit? There is a problem with the FP unit. Please contact your local FP distributor. FP3700-T41 User Manual...
  • Page 56 2.4 Cable Diagrams Adjust the screen display position. Does the screen display 3.3 Operation Mode correctly? Setup and Display Positioning There is a problem with the FP unit. Please contact your local FP distributor. FP3700-T41 User Manual...

  • Page 57: Touch Panel Does Not Respond

    Mode Setup and Display Positioning Connect the SIO or USB cable Is the SIO or USB cable correctly. connected correctly? 2.4 Cable Diagrams There is a problem with the FP unit. Please contact your local FP distributor. FP3700-T41 User Manual...

  • Page 58: Error Message

    Connect the RGB cable/DVI-D cable correctly. PC has not been correctly connected to the FP unit. Set the Dip Switch correctly. The input I/F and the image input signal type 4.1.1Dip Switch Preset are not the same. Settings and Adjustments FP3700-T41 User Manual...
  • Page 59 Memo FP3700-T41 User Manual...

  • Page 60: Chapter 6 Maintenance

    Do not use sharp or hard objects, such as a mechanical pencil or screwdriver, to push on the display. This could damage the unit. Attach the screen protection sheet when using the FP in extremely dirty or dusty Protection sheet areas. FP3700-T41 User Manual...

  • Page 61: Installation Gasket Replacement

    3) Attach the new gasket to the FP. Be sure to insert the gasket into the FP’s groove so that the gasket’s groove sides are vertical. 4) Check if the gasket is attached to the FP correctly. FP3700-T41 User Manual...

  • Page 62: Periodic Check Points

    Related Items • Are all power cords and cables connected properly? Have any become loose? • Are all mounting fasteners holding the unit securely? • Are there any scratches or traces of dirt on the installation gasket? FP3700-T41 User Manual...

  • Page 63: Backlight Replacement

    Follow the procedures given below to replace the FP unit’s backlights. Be sure to wear gloves during replacement. • Be sure to protect the FP front panel’s surface to prevent damage. • The FP has an upper and a lower backlight. Be sure to replace both. FP3700-T41 User Manual...
  • Page 64 Invertor board’s backlight connec- tor. Cable Cable Clamp Backlight Connector 4) Insert a screwdriver into the two holes (points) shown below, and remove the backlight attachment screws (1 per hole). Insert a screwdriver (2 holes) FP3700-T41 User Manual...
  • Page 65 (8) attachment screws. The cable clamp is used to prevent the cable from being caught inside in the FP unit and possibly damaged. Be sure to secure the cable clamp around the cable before replacing the rear cover. FP3700-T41 User Manual...

Table of Contents