Honda 2004 S2000 Owner's Manual page 93

Main Menu Table of Contents
Playing the XM Satellite Radio
The SCAN function gives
SCAN
you a sampling of all channels while
in the channel mode. In the category
mode, only the stations within that
category are scanned. To activate
SCAN, press the SCAN button. The
system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
button again.
90
Comfort and Convenience Features
To store a channel:
You can store up to 12
Preset
preset channels using the six preset
buttons. Each button stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
Press the CD/AUX button. Either
1.
XM1 or XM2 will show in the
display.
2. Use the TUNE knob, the
CATEGORY bar, or the SCAN
button to tune to a desired channel.
In the category mode, only channels
within that category can be selected.
In the channel mode, all channels
can be selected.
3. Pick the preset button you want
for that channel. Press and hold
the button until you hear a beep.
4. Repeat steps 2 to 3 to store the
first six channels.
5. Press the CD/AUX button again.
The available XM band will show.
Store the next six channels using
steps 2 through 3.
Once a channel is stored, simply
press and release the proper preset
button to tune to it.
The presets will be lost if your
vehicle's battery goes dead, is
disconnected, or the radio fuse is
removed.