Wireless touch pad pre-wiring instructions (5 pages)
Summary of Contents for Cover Pools Save-T Cover II
Page 1
OWNER’S MANUAL SAVE-T COVER II ® Diamond Edition ® Automatic Pool Cover Cover-Pools, Inc. 66 East 3335 South Salt Lake City, UT 800-447-2838 Fax 801-484-2763 www.coverpools.com E-mail: sales@coverpools.com Please Read and Follow All Instructions! 800005 REL-0003...
4. Did a representative offer you assistance on how to maintain a safer pool area? 5. Did you receive drowning prevention information? Please take the time with your SAVE-T COVER II representative to go over this list to be sure that you understand the ®...
• NON-SECURED OR IMPROPERLY SECURED COVERS ARE A HAZARD. • DO NOT WALK ON COVER EXCEPT IN AN EMERGENCY. • FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN INJURY OR DROWNING. SAVE-T COVER II® MEETS ASTM F 1346-91 CLASS PCS WHEN USED AS INSTRUCTED. 800005 REL-0003...
PROTECT YOUR INVESTMENT GENERAL: Your automatic cover has been made to be easy to use on a regular basis for many years with little service. Since the automatic cover is easy to use, some people allow almost anyone to operate it. However, our experience shows that the amount of service required grows with the number of non-instructed people who operate the cover.
PUMP PLACEMENT ON POOL COVER NOTE: Cover Pools supplies a varity of pumps depending on the size of your cover and region you live in. Follow the instructions that have been supplied with your pump carefully.
ADJUSTMENTS AND MINOR REPAIR SERVICE: Some service, such as adjusting roll up and patching holes, is so easy you will want to do it yourself. Other service is much more complex than it first appears, and we would ordinarily recommend that an owner leave repairs to your local authorized serviceman or organization.
Page 8
TRACK CLEANING: The track your cover runs in will collect dirt and debris over a period of time. The build up of dirt and debris can affect the operation and adjustment of your cover. If the channels in your cover track are not cleaned when necessary, you will prematurely wear out the edging on your cover and the protective anodized coating on your track.
CHEMICALS AND YOUR COVER The primary thing to remember regarding chemicals and your new cover is that you will almost certainly have to change the quantity and/or frequency that you add chemicals to the water. Where it was previously necessary to chlorinate your pool at a constant rate because chemicals dissipated at a constant rate, with proper use, the cover will substantially diminish the loss of chemicals.
LUBRICATION LUBRICATION: The working life of the mechanism will be enhanced and service problems reduced if a regular lubrica- tion schedule is followed. Never over grease - excessive lubrication will collect dirt and can possibly get on the vinyl cover or webbing.
EMERGENCY PROCEDURES TO COVER THE POOL MANUALLY FOR ANY REASON: This requires two people. Remove the bolt from the cou- pler (#080027) and pull a few feet of rope from the rope reels. Pull ropes equally on either side until the cover is in place. It may be necessary to remove the recess lid to accomplish this, and to unroll the fabric a little manually before pulling it into the track.
Thank you very much for your purchase of our product. Although we make every effort to provide you with the safest product available, we want to stress the following: Cover Pools recommends “Layers” of protection of which our cover is one. You should not rely on any one layer to be fail proof.
Page 13
Designation: F 1346-91 (PSC, MSC, OC) Cover Pools Inc. products Save –T Cover II Diamond Edition, and Step Saver have been manufactured and are in full compliance with ASTM F 1346-91 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs.
Need help?
Do you have a question about the Save-T Cover II and is the answer not in the manual?
Questions and answers