TAG Heuer meridiist User Manual page 13

Power ON or OFF
1. Hold down the [End] key (red marking) for two second to switch on.
2. Enter your SIM card PIN code, if you have previously set one on your SIM card.
The phone searches for your network and when detected, will display the home
screen. The home screen displays the signal strength, charging level, current date
and operator's name.
3. When you wish to switch off the phone, hold down the [End] key for more than two
seconds.
Note: If you enter the wrong Pin code three times in a row, the SIM card will be
blocked. To unblock, you need to enter your PUK (Personal Unblocking Key)
that is provided by your network operator.
Access Codes
There are access codes for your SIM card. These codes help you to protect the phone
against unauthorized use. When requested for any of the code explained below, key-in
the appropriate code (displayed as asterisks) and press the OK key.
• PIN: The Personal Identification Number or PIN (4-8digits) protects your SIM card
against unauthorized use. The PIN comes with the SIM card; see the SIM card
instruction provided with your card. If you enter an incorrect PIN three times in
succession, the code will be disabled and cannot be used until you re-enable it by
entering the PUK.
• PUK: The 8-digit PUK (Personal Unblocking Key) is required to change a disabled
PIN. The PUK may be supplied with the SIM card. If not, or in case you have lost it,
please contact your service provider.
To re-enable your PIN, proceed as follows.
1. Key-in the PUK and press the OK key.
2. Enter a new PIN of your choice and press the OK key.
3. When the Confirm New PIN message is displayed, key-in the same code again
and press the OK key.
13