LG WF-T6600PP Service Manual page 45

11) Spining is going on even though the lid is open.
Where, what & how to check?
Ball Pressure Sensor
1. Is placed the magnetic on the wash? Yes
12) Spin basket doesn
Where, what & how to check?
Main voltage
1. Check voltage at the power outlet
where the washer is plugged into.
Starting Capacitor
1. Check the capacitance of the
starting capacitor.
Clutch Assembling
1. Check the clearance between the
PV link and the brake lever and
clearance between the clutch lever
and the adjustment bolt.
Blocked by foreign objects
1. Check whether the PV asm, the
drain pump & the drain hose are
blocked by foreign objects so that it
makes water-splashing noise in the
tub.
Result of Check
Reed S/W is short
by magnetic on
the washer.
Reed Switch.
No
't r each to full speed(normal rpm)
Result of Check
Less than Tool low voltage
85% of rating
Lack of Defect of
capacitance capacitor
The clearance is
less than 2.0mm
or more than 4.0mm
(WT-T6600PP)
6.0mm(WT-S5707PP).
Bolt clearance is Defect of the
out of range clutch
45
Possible Cause How to repair & settle
Keep magnet away from
the washer.
Change the controller.
Possible Cause How to repair & settle
Explain the cause and
recommend using a
transfomerformer if
necessary.
Change the capacitor
Adjust PV lever bolt and
paint it red.
Reassemble the drain
motor or the clutch.
Adjust the bolt
clearance.
Remove the foreign
objects.