Test Running Without Water - LG WF-T6600PP Service Manual

4-6. TEST RUNNING WITHOUT W ATER
1) METHOD TO USE QC TEST MODE
• To use the CHECK PROGRAM (QC TEST MODE), press PROCESS key, and PROGRAM key at the
same time and then the POWER switch on without depositing any laundry.
NO CHECK METHOD
1 Initial state
2 Press once
3 Press twice
4 Press 3 times
5 Press 4 times
6 Press 5 times
7 Press 6 times
8 Press 7 times
• WATER LEVEL FREQUENCY & LAUNDRY AMOUNT ARE DISPLAY BY THE LED (WATER LEVEL,
PROCESS, PROGRAM)
Ex) Water level check ; Frequency : 26.7 KHz
8 EXTRA
4 ALTO
2 MEDIO
1 BAJO
Ex) Laundry amount ; Water level : MEDIO
8 EXTRA
4
ALTO
2 MEDIO
1
BAJO
LED INDICATOR
• All LED on.
• After 2~3 seconds water level
frequency is displayed on LED.
• After laundry amount detecting,
LED indicates laundry amount
and NIVEL DE AGUA.
• Pump model: MEDIO water
level Led ON.
• Non-pump model:water level
MEDIO water level Led OFF.
8 REMJO RAPIDO
4
LAVADO
2
ENJUAGUE
1 CENTRIFUGADO
Pulse : 25
8
REMJO RAPIDO
4
LAVADO
2
ENJUAGUE
1
CENTRIFUGADO
33
CHECK ITEM
• Laundry amount test.
• After checking laundry amount, motor
is on. (Left & Right)
• Cold water
• Hot water.
• Drain motor is 1st state is play.
• If lid is opened door error display.
(wash and spin LED blinks)
• Drain motor is 2nd state.(Only WF-T Series)
• Drain pump is on.
• AUTO off switch.
8 FUZZY
4 RAPIDO
2 JEAN
1 LANA
8 FUZZY
4 RAPIDO
2 JEAN
1 LANA