Basic Playback; Inserting Discs - JVC XV-MK5GSL Instructions Manual

5
Press ENTER.
The third page is shown, in which the pull-down menu of the
[DIGITAL AUDIO OUTPUT] is already open.
DVD PLAYER SET UP
DIGITAL AUDIO OUTPUT
ANALOG DOWN MIX
D RANGE CONTROL
OUTPUT LEVEL
SELECT USE 5∞23 TO SELECT, USE ENTER TO CONFIRM
ENTER
DIGITAL AUDIO OUTPUT options
6
Press 5/∞ to select a desired digital output
signal type.
Set this item correctly when you connect the unit to an
external surround decoder or D/A converter. (If you do not
connect the unit to such a device, you do not have to set this
item.)
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a DTS decoder, select [STREAM/
PCM].
• When connecting to other digital device, select [PCM
ONLY].
7
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press CHOICE for a few seconds until the DVD PLAYER SET UP
display appears.
To change the brightness of the display window
Press DIMMER - EFFECT on the remote control unit.
You can select the display window brightness from three levels.
DOLBY DIGITAL/PCM
PCM ONLY
DOLBY PROLOGIC
DOLBY DIGITAL/PCM
STREAM/PCM ON

Basic playback

Inserting discs

1
Press 0 (open/close) on the right of the disc
tray you want to open.
2
Place a disc in the disc tray.
IV E
SS
RE
O G
PR
• To insert an 8-cm disc, place it in the inner recess.
3
Press 0 (open/close) located on the right of
the disc tray.
Hint
You can insert or remove the disc by pressing 0 (open/close) for
a disc tray which is not in use for playback while a disc in the
other tray is being played, without interrupting playback.
Using the OPEN/CLOSE button on the remote
control
You can open and close the disc trays by using the OPEN/
CLOSE button on the remote control unit in the following ways.
To open the current disc tray
In stop mode, press OPEN/CLOSE, and the current disc tray
opens.
• To check the current disc number, press ON SCREEN to bring
up the status bar (see page 11).
To remove the disc currently being played
During playback, press OPEN/CLOSE, and the disc tray
containing the disc currently being played opens.
To open the desired tray that contains a disc
1 Press DISC SELECT.
2 Press the numeric buttons (1 to 5) to designate the disc tray
you want to open.
3 Press OPEN/CLOSE.
• If you proceed as above during playback, playback stops.
NOTES
• You cannot use DISC SELECT and the numeric buttons to open
the disc tray whose disc indicator is not lit.
• If you use DISC SELECT and the numeric buttons to designate
a disc tray, or press 0 (open/close) for a disc tray which is not in
use for playback while another disc tray is open, the disc tray
will be closed.
Basic operations
With the label side up
9