Advertisement
MACHINE SETUP
1. Place shredder in an upright position on a flat, level surface, do not slant.
2. Plug in power cord.
3. Ensure the shredder is unplugged after use.
4. Do not place shredder near airconditioners, wet, hot or dusty places.
5. Do not place shredder near direct sunlight or near direct heat.
OPERATION GUIDE
1. Please make sure the power switch is in "OFF mode before plugging into
2. The machine is ready to use when switched to "AUTO".
3. Ensure the following when feeding paper into the shredder:
3.1. Make sure the paper activates the sensor in the middle of the paper in-throat and that the
paper is straight.
3.2. Feed between 1 and 8 sheets of paper, no larger than A4 80g, through at a time.
The S801 Shredder has a an "AUTO-FEEDING" system. This enables the user to place the pages for
shredding into the Auto-Feed tray and walk away. The shredder will automatically feed pages into the
paper throat and stop when all the pages have been shredded. Feed maximum of 60 A4 80gsm pages.
4. Place the machine in reverse mode if there are any paper jams.
(Full waste bins could cause paper jams)
5. Remove waste when the bin is full. Always switch the
machine off before removing the waste bin.
Pressed down -
switched on
Pressed up -
switched off
"
power source.
60pg
Auto-feed
2
Advertisement
