Display Pcb - Vulcan-Hart A-130 Service Manual

SECTION - DISASSEMBLY/REASSEMBLY - -STAGE

. DISPLAY PCB

TOOLS: Phillips screwdriver
CAUTION!
Use proper ESD grounding techniques when handling
electronic components
. . :
Follow steps 8.1.1 through 8.1.2 of CONTROL DRAWER
REMOVAL
. . :
Disconnect grey ribbon connector.
. . :
Remove from snap-on standoffs.
. . :
Replace with new Display PCB.
. . :
Connect grey ribbon connector. Bend away from
Display PCB so it won't cut into ribbon.
8 – 3