Display Page - JVC XV-M556TN Instructions Manual

DOWN MIX
By setting DOWN MIX
correctly, you can get the
optimum stereo mix for
your audio system from
DVD discs recorded with
Dolby Digital surround
multichannel audio.
• Lt/Rt (Dolby Digital disc only):
For monitoring the unit's 2-channel audio output
signals via a Dolby Pro Logic decoder.
• L /R :
0 0
For monitoring the unit's 2-channel audio output
signals via a TV or an amplifier without built-in Dolby
Pro Logic decoder. This is also for recording DVD
audio to a cassette tape, MD, etc.
NOTE
• The Down mix function does not work when the 3D
PHONIC function is activated.
COMPRESSION
You can compress the
dynamic range of the
sound if needed. Using
this function, you can
listen to sound at low
volumes easily.
• ON
Audio is played back with the dynamic range
compressed.
• OFF
Audio is played back as it was recorded.
NOTES
• The Compression function works only when playing back
a disc recorded with DOLBY DIGITAL 1CH or 2CH. The
setting is not effective for other discs.
• The Compression function does not work when the 3D
PHONIC function is activated.
LANGUAGE AUDIO DISPLAY SYSTEM
DOLBY /PCM
DIGITAL AUDIO OUTPUT
DIGITAL
DOWN MIX Lo / Ro
COMPRESSION ON
EXIT
PRESS KEY
LANGUAGE AUDIO DISPLAY SYSTEM
DOLBY
DIGITAL AUDIO OUTPUT /PCM
DIGITAL
DOWN MIX Lo / Ro
COMPRESSION ON
EXIT
PRESS KEY

DISPLAY page

MONITOR TYPE
You can select the monitor type to match your TV when
you playback DVD discs recorded for wide screen
televisions.
• 4:3 LB (Letter Box Conversion)
When you connect a normal TV
to the unit.
When you play a wide picture
recorded on a DVD disc, the
picture is displayed with bands
across the upper and lower
portions of the screen.
• 4:3 PS (Pan scan Conversion)
When you connect a normal TV to the unit.
When you play a wide picture recorded on a DVD
disc, a portion of the picture is automatically cut off
from the left and right sides of
the image.
Depending on the disc, it may
not be possible to playback in
this mode. In that case, the
picture is played back as in 4:3
LB mode.
• 16:9 WIDE (Wide Television screen)
When you connect a
wide-screen TV to the
unit.
SCREEN SAVER
A television monitor screen may be burned out if a
static picture is displayed
for a long time. To prevent
this, the unit automatically
activates the screen saver
function if a static picture,
such as an on-screen
display or menu, is
displayed for over 5
minutes.
• MODE 1
The current picture gets dark.
• MODE 2
The "screen saver" picture appears and its
brightness changes.
• OFF
The screen saver function is off.
NOTES
• The monitor screen of a projector or projection TV is
easily burned out if the screen saver mode is set to OFF
and a static picture is displayed for a long time.
• The screen saver function is not activated when the
selected disc is an Audio CD.
Initial settings
LANGUAGE AUDIO DISPLAY SYSTEM
4:3 LB
MONITOR TYPE
MODE 1
SCREEN SAVER
ON SCREEN GUIDE ON
EXIT
PRESS KEY
44