Advertisement
Once paired and connected, the headset will be automatically connected to your phone whenever you turn the headset
on again, provided your phone is within the range.
5.2 Basic Operations:
• Answering a call:
• Answering the first call: Press the "MFB" button once to answer the first call.
• Answering the sencond call: Press the "MFB" button once to answer the sencond call and end the first call
simultaneously.
• Ending a call: Press the "MFB" button once to end a call.
• Reject a call:
• Reject the first call: Press and hold the "MFB" button for 3 seconds to reject the first call.
• Reject the sencond call: Press "Previous " button once to reject the second call.
• Voice Dial: If your mobile phone has voice dialing enabled, when in standby mode short press both "V+" and "V-"
then say the voice tag you wish to call. (Note: Some phones need to record the voice tag in advance,and some
deos not.)
• Last number redialing: In standby mode, double click the "MFB" button
• Switching a call between headset and mobile phone:
• Headset to Mobile Phone: During a call, press and hold "MFB" for 2 seconds to transfer the call to your mobile phone.
• Mobile Phone to Headset: During a call, press and hold "MFB" for 2 seconds to transfer the call to your headset.
• Mute & Unmute:
• During a conversation -
• Mute the microphone: press and hold "Next" button till you hear a short beep. In mute status, you will hear two beep
every 3 seconds.
• Unmute the speaker phone: press and hold "Next" button again till you hear a short beep
• Restore the Default Setting : Under standby mode, press and hold "Next" button for 8 seconds until the indicator
flash blue and red, then press and hold "MFB" button for 4 seconds, then you will hear a beep, the headphone is
now back to original setting, and after power on again, it will enter pairing mode automatically.
5.3 Music Streaming
Please enter into your phone's music player before listening music on the headset, music will be automatically heard
on your headset for some phones, some need to transfer music from phone to the headset.
• Volume Up: Press and hold" Volume +" or short press "Volume+" to get volume increased
• Volume Down: Press and hold "Volume –" or short press "Volume-"to get volume decreased
• Play Music : Press " MFB" Button
• Pause : Press " MFB" Button
• Previous Track: Press " Previous " Button
• Next Track: Press "Next" Button
Note: Some functions are dependent on the mobile phone being used with the headset and may not work with some
phones where those features are not supported.
6. Working with PC/ Laptop
With PC running Microsoft Vista with Built-in Bluetooth
5.1 Pairing procedure :
A. Ensure your PC with built-in Bluetooth. Turn On the Bluetooth of PC
B. Double click Bluetooth icon, click " Add a new device"
C. Once "Ranger'' found in search list , follow the steps and enter pin code "0000" to pair (some does not need this);
D. Connect the headset to your PC.
E. Headset is ready for use now.
6.2 Streaming the Music
Before streaming the music, you need to change the sound setting first. Go to " Control Panel" – "Sound" – Playback,
change the audio setting to "Bluetooth Stereo Audio".
Play music from your player
•
Pause: During music streaming, press "MFB" Button, press "MFB" Button to resume it.
•
Volume Up: Press and hold "Volume +" or short press " Volume+" to get volume increased
•
Volume Down: Press and hold "Volume –" or short press" Volume-" to get volume decreased
•
Previous / Back track: These two functions are dependent on your PC system, some system allow you to
control it on Headset Previous / Back buttons, some system does not support.
Advertisement
