Advertisement
1. Product Description
Ranger Symphony 380 is a lightweight bluetooth handsfree headphone with in-ear drivers. Ideal for use with PC,
netbook, notebook, mobile phone, mp3 player , etc with bluetooth capability. Whether your are indoor or outdoor, let the
RANGER Symphony 380 accompany you everywhere you go.
2. Product Overview
(1). Speaker
(2). Next
(3). Led Indicator
(4). Previous
(5). Headband
(6). Charging Socket
(7). Multi-Function Button(MFB)
(8). Microphone
(9). Volume Down
(10). Volume Up
What's in the box:
Ranger Symphony 380
l
USB charging cable
l
Manual
l
Warranty card
l
Carry pouch
l
Big silicon ear bud
l
Small silicon ear bud
l
Optional:
l
Travel /car charger/Armband
l
3. Charging
Ranger Symphony 380 uses 2.0mm jack charging socket .
1) First time, please charge the device for no less than 2 hours to make sure the headset is fully charged and the
battery reach its full capacity.
2) Afterwards, each charge cycle may take 2 hours around.
3) LED will indicate red in charging and off when charging is complete.
4) If you have not use the item for a few months, LED might not turn red when first charging. It might take 15-35
minutes before the LED turn red.
Notice:
♦
When battery power is low, the red indicator light will flash red every 15 seconds .
4. Turn On / Off
Turn On: From OFF, press and hold the "MFB" around 4 seconds until the indicator LED show Blue.
Turn Off: From On, press and hold the "MFB" around 4 seconds until the indicator LED show red.
5. Working with mobile phone
It is important to pair the headset with your Bluetooth Mobile phone for the first time use.
5.1 Pairing procedure :
A. Ensure the headset is off
B. Once headset is turned on, if no connection is detected, it will automatically go to pairing mode. You can
otherwise, go to pairing mode by pressing and holding the MFB button (about 7 seconds ) until LED blinks blue
and red alternat ely.
C. Search the headset from your phone ;
D. Once "Ranger'' is found in the search list , follow the steps and enter pin code 0000 to pair (some phones do not
require pin code);
E. Connect the headset to your phone.
F. Headset is ready for use now.
Advertisement
