Enabling Devices 1164 User Manual

Troubleshooting
Nothing happens when the power button is pressed. Make sure your iPad
Wireless switch has been charged for at least one hour. The power light
comes on and an orange light blinks when a connected switch is pressed, but
IPad Wireless Switch#1164
nothing happens on my iPad. First, make sure your iPad Wireless switch is
properly paired with your iPad (see "Setup and Pairing"). Reset the iPad
Wireless switch pairing by turning the unit on, then holding the power button
for 8 seconds until you see a rapid succession of red and green lights. If your
iPad Wireless switch is properly powered and paired to your iPad, but
nothing happens when you press a connected switch, first be sure that you
are working with a compatible app. Be sure to check the compatible apps
setup for specific additional instructions to enable iPad Wireless switch
usage.
Make sure the switch or switches you are using are working with other
devices to rule them out as the source of the problem.
Care of the Unit:
The iPad Wireless switch can be wiped clean with any household multi-
purpose, non-abrasive cleaner and disinfectant.
USER'S GUIDE
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not submerge the unit, as it will damage the electrical components.
iPad™ is a trademark of Apple, Inc.
50 Broadway
For Technical Support:
Hawthorne, NY 10532
Call our Technical Service Department
Tel. 914.747.3070 / Fax 914.747.3480
Monday through Friday, 9 a.m. to 5 p.m. (EST)
Toll Free 800.832.8697
1-800-TEC-TOYS or 1-800-832-8697
www.enablingdevices.com
customer_support@enablingdevices.com