Advertisement
33
Time to install the compressor kit. Included in your box is a premium
compressor kit with all the parts you'll need to install the compressor. This kit
includes instructions specifically written for your engine. Once you've installed
the complete compressor kit, continue on to connecting the hoses.
CONNECTING THE HOSES:
1) Attach the #8 Discharge Hose (13/32") from the connection under the core
support and route to the compressor. Tighten fittings using o-rings and mineral
oil provided.
2) Attach the #6 liquid hose (5/16") from the connection under the core support
connection at the firewall on the evaporator unit (see figure 41). Tighten fittings
using o-rings and mineral oil supplied in kit.
3) Attach the #10 suction hose (1/2") to the compressor and route as mentioned
above. Tighten fittings using o-rings and mineral oil supplied in the kit.
C O M
P L E T
C O M
E
P R E S
S O R
K I T
#8 Hose
Passenger Side Compresssor
#8 Hose
Drivers Side Compresssor
www.classicautoair.com • 866.435.7801
Advertisement
