Highland Ridge RV 2015 Owner's Manual page 47

HIGHLAND RIDGE TOWABLE SECTION 4 - TOWING & SET-UP
Programming a New Code
To set a new code, touch and hold both the "3/4" button and the Enter button for 2
seconds. The keyless entry system will sound (3) short beeps, indicating it is
ready to accept a new code. Enter the new 4 digit code followed by the Enter
button. The system will sound (4) short beeps to indicate acceptance of the new
code. The new code will now activate the lock.
To reset the code, remove the batteries for at least 10 seconds. Re-install the
batteries, and follow the steps for programming a new code.
4-9